Indoor 3-D RT Radio Wave Propagation Prediction Method: PL and RSSI Modeling Validation by Measurement at 4.5 GHz
Authors:
- Ferdous HossainFerdous Hossain
- Tan Kim GeokTGTan Kim Geok
- Tharek Abd RahmanTRTharek Abd Rahman
- Mohammad Nour HindiaMHMohammad Nour Hindia
- Kaharudin DimyatiKDKaharudin Dimyati
- Sharif AhmedSharif Ahmed
- C. P. TsoC. P. Tso
- Azlan AbdazizAAAzlan Abdaziz
- W. LimWLW. Lim
- Azwan MahmudAMAzwan Mahmud
- Tan Choo PengTPTan Choo Peng
- Chia Pao LiewCLChia Pao Liew
Open Access
- 3 July 2019
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 8 (7) , 750
Abstract
This article introduces an efficient analysis of indoor 4.5 GHz radio wave propagation by using a proposed three-dimensional (3-D) ray-tracing (RT) modeling and measurement. The attractive facilities of this frequency band have significantly increased in indoor radio wave communication systems. Radio propagation predictions by simulation method based on a site-specific model, such as RT is widely used to categorize radio wave channels. Although practical measurement provides accurate results, it still needs a considerable amount of resources. Hence, a computerized simulation tool would be a good solution to categorize the wireless channels. The simulation has been performed with an in-house developed software tool. Here, the 3-D shooting bouncing ray tracing (SBRT) and the proposed 3-D ray tracing simulation have been performed separately on a specific layout where the measurement is done. Several comparisons have been performed on the results of the measurement: the proposed method, and the existing SBRT method simulation with respect to received signal strength indication (RSSI) and path loss (PL). The comparative results demonstrate that the RSSI and the PL of proposed RT have better agreements with measurement than with those from the conventional SBRT outputs.Keywords
Funding Information
- Multimedia University ([MMUE/180025].)
This publication has 30 references indexed in Scilit:
- 3D ray launching simulation of urban vehicle to infrastructure radio propagation linksCongreso de Ciencia y Tecnología ESPE, 2018
- The acceleration of the shooting and bouncing ray tracing method on GPUs2017
- Computer simulations for a site-specific modeling of indoor radio wave propagation2017
- A Ray Launching-Neural Network Approach for Radio Wave Propagation Analysis in Complex Indoor EnvironmentsIEEE Transactions on Antennas and Propagation, 2014
- EXPOSURE OPTIMIZATION IN INDOOR WIRELESS NETWORKS BY HEURISTIC NETWORK PLANNINGProgress In Electromagnetics Research, 2013
- Reverberation and Absorption in an Aircraft Cabin With the Impact of PassengersIEEE Transactions on Antennas and Propagation, 2012
- Complex-Wall Effect on Propagation Characteristics and MIMO Capacities for an Indoor Wireless Communication EnvironmentIEEE Transactions on Antennas and Propagation, 2004
- A hybrid technique based on combining ray tracing and FDTD methods for site-specific modeling of indoor radio wave propagationIEEE Transactions on Antennas and Propagation, 2000
- An SBR/image approach for radio wave propagation in indoor environments with metallic furnitureIEEE Transactions on Antennas and Propagation, 1997
- Propagation measurements and models for wireless communications channelsIEEE Communications Magazine, 1995