Effect of Homogenization Time and Cooling Rate on Martensitic Transformations in Ti-57.5%wtNi Alloy
Authors:
- 13 April 2010
- journal article
- Published by Trans Tech Publications, Ltd. in Defect and Diffusion Forum
- Vol. 297-301, 339-343
Abstract
NiTi alloys containing more than 55%wt nickel undergo precipitation of Ni4Ti3, Ni3Ti2, and Ni3Ti phases during various heat treatments which could have a great effect on the chemical composition of the matrix and behavior of alloy. In this investigation, a NiTi alloy with Ti-57.5%wt nickel content, produced by vacuum induction melting in a graphite crucible, were subjected to the homogenization heat treatments in 1100oC and for various time periods (0.5, 1, 2, and 4 hours). The subsequent cooling was conducted in different cooling media (furnace and air) in order to examine the effect of cooling rate. Microstructural investigations show Ni4Ti3 particles with bimodal size distribution in furnace cooling. Differential scanning calorimetry demonstrates the correlation between homogenization time and transformation temperatures of the alloy.Keywords
This publication has 7 references indexed in Scilit:
- Age-induced four-stage transformation in Ni-rich NiTi shape memory alloysJournal of Alloys and Compounds, 2008
- Cyclic ageing of Ti–50.8at.% Ni alloyIntermetallics, 2008
- Multiple-step martensitic transformations in Ni-rich NiTi shape memory alloysScripta Materialia, 2004
- Ni4Ti3-precipitation during aging of NiTi shape memory alloys and its influence on martensitic phase transformationsActa Materialia, 2002
- The mechanism of multistage martensitic transformations in aged Ni-rich NiTi shape memory alloysActa Materialia, 2002
- Interaction between microstructure and multiple-step transformation in binary NiTi alloys usingin-situtransmission electron microscopy observationsPhilosophical Magazine A, 1998
- Bimodal size distribution of Ti3Ni4 particles and martensitic transformations in slowly cooled nickel-rich TiNi alloysScripta Materialia, 1997