Effect of sliding speed and hardness on wear behavior and mechanism of AISI H13 steel
Authors:
- 28 November 2019
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 234 (11) , 1822-1833
Abstract
Dry sliding tests were performed under various sliding speeds and loads in air for AISI H13 steel with different hardness values. Through investigating morphologies, compositions and phases of worn surfaces, the wear behaviors and mechanisms of AISI H13 steel as a function of sliding speed and hardness were explored, and especially, the effects of friction-oxide layers and their stability were disclosed. Sliding speed and the hardness of the steel significantly affected the wear behavior and mechanism due to the evolution of friction-oxide layers. With an increase of sliding speed, more oxides were produced by the process of friction oxidation. The stability of friction-oxide layers became a key factor in determining wear rate, which was closely related with the hardness of the steel. Those friction-oxide layers formed on the quenched and tempered steel with lower hardness remained stable, providing more protection from wear. Three types of wear mechanisms were found to prevail. Adhesive and abrasive wear were dominant accompanied with oxidation mild wear at relatively low sliding speeds, where the wear resistance was proportional to the hardness of the steel. As sliding speed increased, oxidation mild wear became dominating, where the wear resistance was not related to the hardness of the steel. As the sliding speed further increased, the wear fell in oxidation mild-to-severe wear transition region, in which the wear resistance was inversely proportional to the hardness of the steel.Keywords
Funding Information
- National Natural Science Foundation of China (51071078)
This publication has 21 references indexed in Scilit:
- Characteristics of oxidative wear and oxidative mildwearTribology International, 2013
- Extrusion wear and transition of wear mechanisms of steelWear, 2008
- Formation and wear mechanism of tribo-oxides and the regime of oxidational wear of steelWear, 2002
- Oxidational wear modelling Part III. The effects of speed and elevated temperaturesWear, 1998
- Research on the wear characteristics of hypereutectoid steelWear, 1997
- Characteristics of wear results tested by pin-on-disc at moderate to high speedsTribology International, 1996
- Self-formation of protective oxide films at dry sliding mild steel surfaces under a medium vacuumWear, 1995
- The third-body approach: A mechanical view of wearWear, 1984
- Developments in the oxidational theory of mild wearTribology International, 1980
- The development of wear-protective oxides and their influence on sliding frictionProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1980