Micromachined Fabry-Perot optical filters
- 27 November 2002
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 283-286
Abstract
The design, fabrication and measured characteristics of micromachined Fabry-Perot (F-P) optical filters for the visible spectral range are presented. Silver films of 40-50 nm thickness, evaporated on a 300 nm thick low-stress silicon nitride membrane, are used as high-quality mirrors. Two parallel mirrors, with a square aperture of up to 2/spl times/2 mm/sup 2/ and initial cavity gap of 1.2 /spl mu/m, form a tunable Fabry-Perot optical filter. One of the mirrors is fixed the other is under tension on a movable Si frame, which is electrostatically defected to control the mirror spacing and parallelism. Results are compared with non-tunable F-P filters that are composed of a Ag/SiN/Ag or Ag/SiO/sub 2//Al layer stack. The FWHM of 40 nm (tunable filter) and 16 nm (non-tunable filter) have been achieved.Keywords
This publication has 5 references indexed in Scilit:
- A Fabry-Perot microinterferometer for visible wavelengths2003
- Optical properties of thin-film silicon-compatible materialsApplied Optics, 1997
- Surface micromachined Fabry-Perot tunable filterIEEE Photonics Technology Letters, 1996
- Thin-Film Optical Filters1986
- Progress in the development of a durable silver-based high-reflectance coating for astronomical telescopesApplied Optics, 1985