Guidelines for Impact Echo Test Signal Interpretation Based on Wavelet Packet Transform for the Detection of Pile Defects
Open Access
- 10 April 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (7) , 2633
Abstract
Nonlinear amplification is typically done on velocity signals from low-strain pile integrity tests to enhance weak echoes and superimpose any peak reflections. This conventional method may sometimes fail to untangle the hidden information within the signal that is obscured by the presence of noise. In this study, a pile defect identification system based on the conventional nonlinear amplification method and the wavelet packet transform (WPT) was proposed to easily detect the presence of any geometric or material defects by identifying feature parameters. Diagnostic rules, which have been lacking in the literature, were presented to serve as a guide in interpreting decomposed signals and in analyzing various characteristics of peak waveforms that are associated with certain types of defects. In this study, the finite element method was used to simulate the impact echo test of nine cases of defective piles. To verify the proposed scheme, six data sets of the nine cases of defective piles were made, in which a total of 54 piles were analyzed. The results of the study showed that the identification method based on WPT could detect defects 87.04% of the time compared to the conventional method, which only detected defects 64.81% of the time.Keywords
Funding Information
- National Research Foundation of Korea (2017R1D1A3B03034189)
- Korea Institute of Energy Technology Evaluation and Planning (20183010025200)
This publication has 19 references indexed in Scilit:
- Exploiting Deep Learning for Wind Power Forecasting Based on Big Data AnalyticsApplied Sciences, 2019
- Probabilistic Forecasting of Short-Term Electric Load Demand: An Integration Scheme Based on Correlation Analysis and Improved Weighted Extreme Learning MachineApplied Sciences, 2019
- A Survey of Condition Monitoring and Fault Diagnosis toward Integrated O&M for Wind TurbinesEnergies, 2019
- Application of the wavelet packet transform to vibration signals for surface roughness monitoring in CNC turning operationsMechanical Systems and Signal Processing, 2018
- Epileptic seizure detection based on imbalanced classification and wavelet packet transformSeizure: European Journal of Epilepsy, 2017
- Damage detection of jacket type offshore platforms using rate of signal energy using wavelet packet transformMarine Structures, 2016
- Wavelet packet based damage identification of beam structuresInternational Journal of Solids and Structures, 2005
- Selection of wavelet packet basis for rotating machinery fault diagnosisJournal of Sound and Vibration, 2005
- A theory for multiresolution signal decomposition: the wavelet representationIEEE Transactions on Pattern Analysis and Machine Intelligence, 1989
- Drilled-Shaft Integrity by Wave Propagation MethodJournal of the Geotechnical Engineering Division, 1981