Plasma Diagnostics in Inductively Coupled Plasma Etching Using Cl2/Xe
Authors:
- Akihiro MatsutaniAMAkihiro Matsutani
- Hideo OhtsukiHOHideo Ohtsuki
- Fumio KoyamaFKFumio Koyama
- Kenichi IgaKIKenichi Iga
- 1 March 2000
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 39 (3R)
Abstract
We investigated the plasma characteristics in an inductively coupled plasma (ICP) etching process using Cl2/Xe by means of a quadrupole mass spectrometer equipped with an ion energy analyzer. It was found that the ion energy of Cl+ increased with decreasing etching pressure, and the quantity of Cl+ increased with decreasing Cl2 flow rate. Ions including etching products such as Si+, Cl+, Xe+ and SiCl x + were observed in the etching plasma. It is suggested from the results of this experiment that the etching profile can be controlled by the in situ monitoring of the quantity of Cl+ ions.Keywords
This publication has 5 references indexed in Scilit:
- Vertical and Smooth Etching of InP by Cl2/Xe Inductively Coupled PlasmaJapanese Journal of Applied Physics, 1999
- Ion energy distribution functions in inductively coupled radio-frequency discharges—Mixtures of Cl2/BCl3/ArJournal of Vacuum Science & Technology A, 1998
- Plasma Characterization in Chlorine-Based Reactive Ion Beam Etching and Chemically Assisted Ion Beam EtchingJapanese Journal of Applied Physics, 1998
- Ion Energy Analysis through rf-ElectrodeJapanese Journal of Applied Physics, 1997
- Ion bombardment energy distributions in a radio frequency induction plasmaApplied Physics Letters, 1993