The Investigation of Graphene Oxide-Enhanced Hybrid Slurry Preparation and Its Polishing Characteristic on CVD Single Crystal Diamond
Open Access
- 11 December 2024
- Vol. 17 (24) , 6053
Abstract
As an environment-friendly material, graphene oxide nanosheet can effectively improve the polishing surface quality of single crystal diamond workpieces. However, the lubricating and chemical effects of graphene oxide nanosheets have an uncertain impact on the polishing material removal rate. In this paper, the graphene oxide-enhanced hybrid slurry was prepared with good stability. The femtosecond laser etching and contour measurement method was adopted to analyze the polishing material removal rate of the CVD single crystal diamond workpiece. The surface damage of the workpiece polished with SiC abrasive grains is minimal, while the workpiece with diamond abrasive grains has the largest material removal rate. With an increase in abrasive grain size, the polishing material removal rate increases, but new surface scratches and pits can be introduced if the grain size is too large. Therefore, a grain size of 2.5 μm was selected to improve the surface quality. The surface roughness first decreases and then increases with the increase in polishing rotation speed. At a speed of 4000 rpm, the surface roughness reached its minimum with a relatively high material removal rate simultaneously. A series of CVD single crystal diamond scratching experiments were conducted with different scratching speeds, which proved that graphene oxide can help facilitate material surface micro-protrusion removal.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFE0121500, 52405460, U23B20106, 52075494, 2023-MSBA-032, 2021M700717, N2403018, 20210309)
- National Natural Science Foundation of China (2022YFE0121500, 52405460, U23B20106, 52075494, 2023-MSBA-032, 2021M700717, N2403018, 20210309)
- Liaoning Provincial Natural Science Foundation of China (2022YFE0121500, 52405460, U23B20106, 52075494, 2023-MSBA-032, 2021M700717, N2403018, 20210309)
- China Postdoctoral Science Foundation (2022YFE0121500, 52405460, U23B20106, 52075494, 2023-MSBA-032, 2021M700717, N2403018, 20210309)
- Fundamental Research Funds for the Central Universities (2022YFE0121500, 52405460, U23B20106, 52075494, 2023-MSBA-032, 2021M700717, N2403018, 20210309)
- Northeastern University Postdoctoral Foundation (2022YFE0121500, 52405460, U23B20106, 52075494, 2023-MSBA-032, 2021M700717, N2403018, 20210309)
This publication has 28 references indexed in Scilit:
- Honey-Derived Hydrochar Containing 2,2,6,6-tetramethylpiperidine-1-oxyl Free Radical for Degradation of Aqueous Organic PollutantsEnvironmental Processes, 2024
- Novel ceria/graphene oxide composite abrasives for chemical mechanical polishingCeramics International, 2024
- Chemically grafted polyurethane/graphene ternary slurry for advanced chemical–mechanical polishing of single-crystalline SiC wafersThe International Journal of Advanced Manufacturing Technology, 2022
- Ultrathin Diamond Nanofilms—Development, Challenges, and ApplicationsSmall, 2021
- Effects of compound diamond slurry with graphene for lapping of sapphire wafersThe International Journal of Advanced Manufacturing Technology, 2020
- Solvent-free ionic nanofluids based on graphene oxide-silica hybrid as high-performance lubricating additiveApplied Surface Science, 2019
- Optoelectronic Diamond: Growth, Properties, and Photodetection ApplicationsAdvanced Optical Materials, 2018
- Chemical kinetics mechanism for chemical mechanical polishing diamond and its related hard-inert materialsThe International Journal of Advanced Manufacturing Technology, 2017
- An investigation on dielectric properties of diamond films in the range of K and Ka bandDiamond and Related Materials, 2017
- Mechanochemical superpolishing of diamond using NaNO3 or KNO3 as oxidizing agentsSurface Science, 1995