Millimeter-wave gain experiments with a wide-band omniguide traveling-wave tube
- 1 April 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 297-298
Abstract
We report the results of recent high power electron beam tests of a novel W-band traveling-wave tube (TWT) amplifier based on a slow-wave cylindrically-symmetric photonic band gap (PBG) structure called the "omniguide". Dielectric PBG TWTs have a wide operational frequency band (more than 20%) and may be favorable for use at millimeter wave frequencies due to shortcomings of conventional metal TWT technology. The omniguide structure's design and fabrication were reported elsewhere [1]. For the tests, we passed the 1 A, 110 kV, 2 μm long electron beam pulses through a 0.92 mm diameter hole in the omniguide inner dielectric tube. A 100 mW source which was tunable from 91 to 101.5 GHz was used to drive the tube. A gain of about 2.5 dB per cm has been demonstrated in well reproducible pulses.Keywords
This publication has 5 references indexed in Scilit:
- Design, Fabrication, and Low-Power Tests of a W-band Omniguide Traveling-Wave Tube StructureIEEE Transactions on Plasma Science, 2008
- Beam Line Design, Beam Alignment Procedure, and Initial Results for the$W$-Band Gain Experiment at Los AlamosIEEE Transactions on Plasma Science, 2006
- Wavelength-scalable hollow optical fibres with large photonic bandgaps for CO2 laser transmissionNature, 2002
- Millimeter-wave radar sensing of airborne chemicalsIEEE Transactions on Microwave Theory and Techniques, 2001
- Guiding optical light in air using an all-dielectric structureJournal of Lightwave Technology, 1999