Development of hot embossing setup and fabrication of ordered nanostructures on large area of polymer surface for antibiofouling application
Open Access
- 6 February 2019
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 14 (2) , 191-195
Abstract
Nanostructured polymeric film has wide range of applications in different fields. However, the existing processes of fabrication of nanostructures on polymer surfaces are limited to very small area and throughput of the processes is very low. In order to solve this challenge, the indigenous hot embossing setup was developed which is capable of patterning micro‐nano structures on large area. In this work, the steps for the development of hot embossing setup are discussed. The setup requires nanostructured mould, copper‐chromium block, pencil heaters and temperature controlled system (thermostat and thermocouple). Two different types of nanostructures (groove and pillars) were successfully replicated on polystyrene film. The fabricated nanostructures were characterised using field emission scanning electron microscope and atomic force microscope. The dimensions of fabricated nanostructures are close to the mould dimensions with few defects (shrinkage defects). The wettability test was performed using goniometer on plain and structured polystyrene film to study the effect of structures on the wettability of the surface. It was observed that the hydrophilic (water droplet contact angle: 43°) polystyrene film got converted into hydrophobic (water droplet contact angle: 102–112°) nature. The fabricated structured surfaces have shown antibiofouling property which was confirmed through plate counting method.Keywords
This publication has 29 references indexed in Scilit:
- Using UV roll-to-plate imprint lithography to fabricate light guide plates with microdot patternsMicro & Nano Letters, 2012
- Formation of silicon nanograss and microstructures on silicon using deep reactive ion etchingMicro & Nano Letters, 2010
- Enhancement of the light conversion efficiency of silicon solar cells by using nanoimprint anti-reflection layerSolar Energy Materials and Solar Cells, 2010
- Fabrication of Large Area Periodic Nanostructures Using Nanosphere PhotolithographyDiscover Nano, 2008
- Fabrication of an antireflective polymer optical film with subwavelength structures using a roll-to-roll micro-replication processJournal of Micromechanics and Microengineering, 2008
- Proliferation of aligned mammalian cells on laser-nanostructured polystyreneBiomaterials, 2008
- Micro and nano structures of carbonised polymer through pyrolytic transformation from polymer structuresMicro & Nano Letters, 2006
- Cell culturing on nanogrooved polystyrene petri dish induced by ultraviolet laser irradiationMaterials Letters, 2004
- Microfabricated plastic chips by hot embossing methods and their applications for DNA separation and detectionSensors and Actuators B: Chemical, 2001
- Wettability of porous surfacesTransactions of the Faraday Society, 1944