The Influences of Grain Refiner, Inclusion Level, and Filter Grade on the Filtration Performance of Aluminum Melt
Authors:
Open Access
- 21 September 2021
- journal article
- research article
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 52 (6) , 3946-3960
Abstract
The addition of grain refiner particles in the aluminum melt is known to reduce the filtration efficiency of ceramic foam filter (CFF). In the present work, a systematic study on the influence of the addition level of Al-Ti-B master alloys and the inclusion level on the filtration performance of aluminum melt has been investigated by pilot-scale filtration tests using 50 PPi and 80 PPi filters. The inclusion level of the melt has been measured using both LiMCA and PoDFA. For 80 PPi CFF, the N20 inclusion (diameter larger than 20 μm) value in the post-filtrated melt does not increase when an ultra-high level of inclusions is introduced in the form of chips. For the melts with a low level of grain refiners (~ 0.5 kg/ton), the filtration performance of CFF is not affected by grain refiners, regardless of inclusion load. An addition of 2.0 kg/ton grain refiners reduces the filtration performance for melts with a high inclusion level, where post-filtration inclusions with the size of 15-20 µm were significantly increased. It is found, however, for the melts with an ultra-high inclusion load, the filtration performance of 80 PPi CFF is not affected by the grain refiner addition up to 2.0 kg/ton. The interactions between inclusions and grain refiner particles and the filtration mechanism have been studied by characterizing the spent filter and measuring the pressure drop during the filtration process. It is revealed that the strong adherence between oxide film with grain refiner particles dominates the grain refiner influence on the filtration performance of CFF. During the filtration process, oxide films have strong influences on the capturing of other inclusions such as oxide particles and TiB2 particles by the filter. A mechanism based on the interactions between oxide films and grain refiner particles is proposed to explain the CFF performance under the influence of grain refiner.Keywords
Funding Information
- NTNU Norwegian University of Science and Technology
This publication has 26 references indexed in Scilit:
- Wetting of pure aluminium on graphite, SiC and Al2O3 in aluminium filtrationTransactions of Nonferrous Metals Society of China, 2012
- Inclusion (particle) removal by interception and gravity in ceramic foam filtersJournal of Materials Science, 2012
- Removal of Inclusions from Aluminum Through FiltrationMetallurgical and Materials Transactions B, 2010
- Pilot-Scale Investigation of Liquid Aluminum Filtration through Ceramic Foam Filters: Comparison between Coulter Counter Measurements and Metallographic Analysis of Spent FiltersMetallurgical and Materials Transactions B, 2009
- Melt Treatment of Copper and Aluminium – The Complex Step Before Casting2005
- Purification technology of molten aluminumJournal of Central South University of Technology, 2004
- Electromagnetic separation techniques in metal casting. I. Conventional methodsIEEE Transactions on Magnetics, 2000
- Analyses of the dynamic processes of liquid metal filtrationMetallurgical and Materials Transactions B, 1999
- Direct simulation of initial filtration phenomena within highly porous mediaMetallurgical and Materials Transactions B, 1995
- Ceramic Foam For Molten metal FiltrationJOM, 1985