The effect of different powder particle size on mechanical properties of sintered alumina, resin‐ and glass‐infused alumina
- 29 October 2008
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 88B (2) , 502-508
Abstract
In this study, the compaction and sintering behavior of fine alumina powders of different particle sizes and the effect of matrix particle size on biaxial strength and fracture toughness of infused matrices were investigated. Three different alumina powders, In‐Ceram alumina, A16SG, and RC172 were selected, representing a range of particle size and shape. RC172 and A16SG were dry‐pressed. In‐Ceram alumina was slip‐cast following manufacturer's recommendations. Dry‐pressed ceramic blocks were sectioned into disks with a thickness of 1.5‐mm. Uninfused disks were sintered at four temperatures between 1250°C and 1400°C. For glass or resin infused specimens, alumina disks were sintered at 1250°C for 2 h and separated into two groups for glass infusion and resin (UDMA/TEGDMA) infusion. Disks were tested for biaxial flexural strength with a universal testing machine (Instron) at 0.5‐mm/min crosshead speeds. One‐way ANOVA and Duncan's multiple range tests revealed that alumina disks with different smaller particle sizes have significantly higher biaxial strength (p< 0.05). The strength of the alumina matrix was greatly increased by glass and resin infusion. The biaxial strength of resin‐infused alumina increased as particle size decreased, whereas strength of glass‐infused alumina was constant. © 2008 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2009Keywords
This publication has 19 references indexed in Scilit:
- In situ optical dilatometric measurements of the initial stages of sintering of aluminaActa Materialia, 2001
- Mechanical Properties of Tape‐Cast Alumina‐Glass Dental CompositesJournal of the American Ceramic Society, 1999
- Influence of ceramic powders of different characteristics on particle packing structure and sintering behaviourJournal of Materials Science, 1999
- Effect of Size Distribution of the Starting Powder on the Pore Size and its Distribution of Tape Cast Alumina Microporous MembranesJournal of the European Ceramic Society, 1999
- Colloidal processing of sub-micron alumina powder compactsJournal of Materials Processing Technology, 1997
- A review of the strength properties of dental ceramicsThe Journal of Prosthetic Dentistry, 1992
- Interpenetrating Phase CompositesJournal of the American Ceramic Society, 1992
- Effects of Particle Packing Characteristics on Solid‐State SinteringJournal of the American Ceramic Society, 1989
- Low‐Temperature Sintering of Aluminum OxideJournal of the American Ceramic Society, 1988
- Sinterability of Agglomerated PowdersJournal of the American Ceramic Society, 1984