Development and experimental characterization of the thermomechanical behavior of a scaled steel ladle
Authors:
- 2 May 2024
- journal article
- research article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 21 (5) , 3660-3677
Abstract
A steel ladle usually employs mortarless refractory masonry in the innermost layer in direct contact with molten steel. The behavior of such masonry under high thermal loading is complex and essential for designing such installation. A large‐scale experimental campaign was carried out focusing on a simplified, laboratory‐scaled, pilot steel ladle built with multiple refractory linings as in an industrial ladle. Tests were performed under transient thermal loading up to 1400°C with new and used working linings. The results showed that the distribution of temperatures between the refractory linings was similar for all specimens and confirmed the importance of the selection of the refractory materials in the distinct linings of the ladle to limit heat losses. The heterogeneity in the distribution of dry joints and the effect of the dry joint thickness were also measured using strain gauges. The measurements indicate the effect of viscoplasticity in the working lining on the steel shell, which shows a progressive reduction in the strain starting at 1200°C. The tests performed on the working linings show lower strain built‐up due to large viscoplastic deformation and increased joint thickness.Keywords
This publication has 30 references indexed in Scilit:
- Multi‐Response Optimization of the Thermal and Thermomechanical Behavior of a Steel Ladle Lining using Grey Relational Analysis and Technique for Order Preference by Similarity to Ideal SolutionSteel Research International, 2022
- Combined damaged elasticity and creep modeling of ceramics with wedge splitting testsCeramics International, 2021
- Role of fatigue in damage development of refractories under thermal shock loads of different intensityCeramics International, 2020
- Statistical study of compressive creep parameters of an alumina spinel refractoryCeramics International, 2020
- Materials selection of furnace linings with multi-component refractory ceramics based on an evolutionary screening procedureCeramics International, 2020
- Three stage creep behavior of MgO containing ordinary refractories in tension and compressionCeramics International, 2019
- Enhanced numerical tool to evaluate steel ladle thermal lossesCeramics International, 2018
- Tensile creep measurements of ordinary ceramic refractories at service related loads including setup, creep law, testing and evaluation proceduresCeramics International, 2016
- Thermomechanical Behavior of Steel Ladle Linings and the Influence of InsulationsSteel Research International, 2013
- Investigation of the nonlinear fracture behaviour of ordinary ceramic refractory materialsMaterials Science and Engineering: A, 1996