The effect of additive geometry on the integration of secondary elements during Friction Stir Processing
Authors:
Open Access
- 12 June 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 373 (1) , 012018
Abstract
Friction Stir Processing (FSP) can be used to locally modify properties in materials such as aluminium. This may be used, for example, to produce a fine microstructure or to integrate secondary elements into the base material. The purpose of this work is to examine the effect of the properties of the metal additives on the resulting material distribution in the processed region. For this, commercially pure iron and copper were integrated into an EN AW-1050 aluminium base material using FSP. Iron in the form of powder, wire and foil as well as copper in powder form were assessed. The various additive forms represent materials with differing surface-to-volume ratios as well as varying dispersion characteristics in the processing zone. The processing parameters for each additive form remained constant; however, two- and four-pass FSP processes were conducted. The results of CT analysis proved especially insightful regarding the spatial distribution of the various additive form within the workpiece. As expected, the powder additive was most widely distributed within the welding zone. Micro-hardness mappings showed that the powder additive contributed to the hardness within the weld nugget in comparison to the processed material without secondary elements.Keywords
This publication has 9 references indexed in Scilit:
- The Effect of Premixed Al-Cu Powder on the Stir Zone in Friction Stir Welding of AA3003-H18Journal of Materials Engineering and Performance, 2014
- Microstructure and surface mechanical property of AZ31 Mg/SiCp surface composite fabricated by Direct Friction Stir ProcessingMaterials & Design (1980-2015), 2014
- The Effect of Cu Powder During Friction Stir Welding on Microstructure and Mechanical Properties of AA3003-H18Metallurgical and Materials Transactions A, 2014
- Functionally graded materials produced by friction stir processingJournal of Materials Processing Technology, 2011
- Fabrication of Fe-Based Metallic Glass Particle Reinforced Al-Based Composite Materials by Friction Stir ProcessingMATERIALS TRANSACTIONS, 2011
- Intermetallic-reinforced aluminum matrix composites produced in situ by friction stir processingMaterials Letters, 2007
- Three-dimensional heat and material flow during friction stir welding of mild steelActa Materialia, 2007
- Mg based nano-composites fabricated by friction stir processingScripta Materialia, 2006
- Friction stir processing: a novel technique for fabrication of surface compositeMaterials Science and Engineering: A, 2003