Accuracy of Test Interval Method of Calculating Dairy Herd Improvement Association Records
Authors:
Open Access
- 1 December 1968
- journal article
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 51 (12) , 1936-1941
Abstract
The test interval method (TIM) of test- ing, modified to adjust production in the beginning and last test periods, and modi- fied to adjust production in the beginning test periods only were simulated on indi- vidual daily milk weights of 403 Holstein lactations from the Cornell University dairy herd. The test interval method overesti- mated average lactation production by 57.1, 91.4, and 114.7 kg of milk; whereas, cor- recting production in the beginning and last periods overestimated actual lactation production by 9.1, 9.0, and --2.0 kg of milk for monthly, bimonthly, and trimonthly testing, respectively. Corrections for only the beginning test periods were moderately successful in reducing the bias for short test intervals; whereas, the trimonthly testing actually increased the average bias by 49.3% over the bias of the unadjusted test interval method. The variances of devia- tions from actual yield were reduced to 87.7, 83.1, and 78.2% of the variances in the unadjusted monthly, bimonthly, and trimonthly test interval method. The center- ing date method (CDM) estimated actual production more closely than the test inter- val method. But, if beginning and last pe- riod adjustments are made to test interval method, it errs less than the unadjusted centering date method. Correcting production in the beginning and last test periods merits consideration in all forms of production testing and espe- cially in bimonthly and trimonthly testing. The National Dairy Herd Improvement Asso- ciation Coordinating Committee approved the test interval method (TIM) of calculating pro- duction credits for official Dairy Herd Improve- ment Association (DHIA) production records in March, 1967. The calculations of TIll are given by Sargent et al. (4). McDaniel (3) has reviewed various methods of calculating production credits and the accu- racy of each method. Everett et al. (1) recorded the biases present in the centering date method (CDM) of calculating production credits and presented correction factors to reduce the bias. Correcting CDM records was especially usefulKeywords
This publication has 3 references indexed in Scilit:
- Accuracy of Monthly, Bimonthly, and Trimonthly Dairy Herd Improvement Association RecordsJournal of Dairy Science, 1968
- Test Interval Method of Calculating Dairy Herd Improvement Association RecordsJournal of Dairy Science, 1968
- Evaluation of the Dairy Herd Improvement Association Record SystemJournal of Dairy Science, 1968