Novel high step‐up dual switches converter with reduced power device voltage stress for distributed generation system
Open Access
- 1 November 2017
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 10 (14) , 1800-1809
Abstract
This study introduces a new dual switches converter with a high voltage gain and reduced power device voltage stress. Using a three‐winding coupled inductor and voltage multiplier, the proposed converter achieves a high step‐up voltage gain without a large duty cycle. However, unlike other converters with coupled inductor, the power device voltage stress in the proposed converter is dramatically reduced. The two clamped diodes not only alleviate the voltage spike across the metal–oxide–semiconductor field‐effect transistor (MOSFET), but also reduce the diode reverse recovery issue. The efficiency can be improved as circuit allows the use of low on‐resistance MOSFETs and Schottoky diodes in applications where this might not have been possible with conventional topologies. The basic operational principle and relevant theoretical analysis are presented in this study. Finally, practical results from a laboratory prototype are presented to verify the performance of the proposed converter.Keywords
This publication has 19 references indexed in Scilit:
- Y-Source Boost DC/DC Converter for Distributed GenerationIEEE Transactions on Industrial Electronics, 2014
- High Step-Up Converter With Three-Winding Coupled Inductor for Fuel Cell Energy Source ApplicationsIEEE Transactions on Power Electronics, 2014
- High step-up boost converter with passive lossless clamp circuit for non-isolated high step-up applicationsIET Power Electronics, 2011
- Novel High Step-Up DC–DC Converter With Coupled-Inductor and Switched-Capacitor Techniques for a Sustainable Energy SystemIEEE Transactions on Power Electronics, 2011
- Novel High Step-Up DC–DC Converter for Distributed Generation SystemIEEE Transactions on Industrial Electronics, 2011
- Voltage-lift-type switched-inductor cells for enhancing DC–DC boost ability: principles and integrations in Luo converterIET Power Electronics, 2011
- Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected ApplicationsIEEE Transactions on Industrial Electronics, 2010
- Voltage Multiplier Cells Applied to Non-Isolated DC–DC ConvertersIEEE Transactions on Power Electronics, 2008
- A New Design Method for High-Power High-Efficiency Switched-Capacitor DC–DC ConvertersIEEE Transactions on Power Electronics, 2008
- High-efficiency, high step-up DC-DC convertersIEEE Transactions on Power Electronics, 2003