Improvement of multicrystalline silicon solar cells by a low temperature anneal after emitter diffusion
Authors:
- 23 February 2011
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 19 (2) , 165-169
Abstract
The influence of an annealing step at about 500 °C after emitter diffusion of multicrystalline solar cells is investigated. Neighboring wafers from a silicon ingot were processed using different annealing durations and temperatures. The efficiency of the cells was measured and detailed light beam induced current measurements were performed. These show that mainly areas with high contents of precipitates near the crucible walls are affected by the anneal. An efficiency increase from 14.5 to 15.4% by a 2 h anneal at 500 °C was observed. The effect seems to be more likely external than internal gettering. Copyright © 2010 John Wiley & Sons, Ltd.Keywords
This publication has 9 references indexed in Scilit:
- Internal gettering of iron in multicrystalline silicon at low temperatureApplied Physics Letters, 2008
- Iron point defect reduction in multicrystalline silicon solar cellsApplied Physics Letters, 2008
- Improved phosphorous gettering of multicrystalline siliconSolar Energy Materials and Solar Cells, 2006
- Simulation of Al and phosphorus diffusion gettering in SiMaterials Science and Engineering: B, 2000
- Iron and its complexes in siliconApplied Physics A, 1999
- LBIC Investigations of the Lifetime Degradation by Extended Defects in Multicrystalline Solar SiliconSolid State Phenomena, 1998
- Iron precipitation in float zone grown siliconJournal of Applied Physics, 1997
- Theory of beam induced current characterization of grain boundaries in polycrystalline solar cellsJournal of Applied Physics, 1983
- Effects of grain boundaries in polycrystalline solar cellsApplied Physics Letters, 1980