Automatic Cooling of a PV System to Overcome Overheated PV Surface in Palembang
Authors:
Open Access
- 1 April 2020
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1500 (1)
Abstract
An automatic cooling for a PV panel is necessary to reduce the solar panel surface temperature and to avoid overheating that can lead to the destruction of a PV cell. The automatic design cooling is equipped with a thermostat as the temperature sensor. The automatic cooling consists of a thermostat, a microcontroller to regulate a pump and to flow water on the surface of the solar panel. The reference temperature is set to 36oC, and when the surface temperature exceeds the reference temperature, the pump will flow the water, and the heat is gradually reduced. The pump is off when the surface temperature is less than 36oC. The data application of automatic cooling was taken from 08.30 AM to 03.30 PM. The average power output for automatic cooling is 21.9 W, and the normally installed panel is 19.0 W. The difference in the average output power is 2.9 W. The panel with the automatic cooling system has higher efficiency (3.4%) compared to the normally installed panel (3.0%), with the difference of 0.4%. The application of automatic cooling is economically beneficial due to its output power and efficiency superior compare to the normally installed panel.Keywords
This publication has 11 references indexed in Scilit:
- A Review of Factors Affecting the Efficiency and Output of a PV System Applied in Tropical ClimateIOP Conference Series: Earth and Environmental Science, 2019
- Demonstration project of a cooling system for existing PV power plants in PortugalApplied Energy, 2018
- Thermal–electrical model for energy estimation of a water cooled photovoltaic moduleSolar Energy, 2016
- Performance of a PV module integrated with standalone building in hot arid areas as enhanced by surface cooling and cleaningEnergy and Buildings, 2015
- Advancements in hybrid photovoltaic systems for enhanced solar cells performanceRenewable and Sustainable Energy Reviews, 2015
- Radiative cooling of solar cellsOptica, 2014
- Enhancing the performance of photovoltaic panels by water coolingAin Shams Engineering Journal, 2013
- Thermal management systems for Photovoltaics (PV) installations: A critical reviewSolar Energy, 2013
- Improving the Electrical Parameters of a Photovoltaic Panel by Means of an Induced or Forced Air StreamInternational Journal of Photoenergy, 2013
- Flat-plate PV-Thermal collectors and systems: A reviewRenewable and Sustainable Energy Reviews, 2008