Novel catalyst layer synthesized by an in situ sol–gel process with tetraethoxysilane in a Nafion ionomer solution with Pt/C for PEFCs: the effect of self-assembled Nafion–SiO2 on Pt ORR activity and an increased water content in the polymer membranes
Authors:
- 5 July 2012
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 2 (17) , 6957-6969
Abstract
A highly optimized catalyst layer, under low humidity conditions, was developed through an in situ sol–gel process with tetraethoxysilane (TEOS) in a Nafion ionomer solution with Pt/C in order to prepare a polymer electrolyte fuel cell (PEFC). This method is quick and does not require the use of additional solvents to accomplish the sol–gel reaction of TEOS at high temperatures compared to other ex situ sol–gel methods. Amorphous SiO2 nanoparticles of in situ sol–gel reaction, due to their very high acidity, –SO3H groups attached to the Nafion polymer conveniently served as catalyst to facilitate the hydrolysis reaction. Hydrolyzed alkoxysilanes migrated to the negatively charged sulfonate groups (–SO3 −) due to a rapid increase in the ζ potential of the SiO2 nanoparticles at pH < 2, which resulted in a core–shell structure in the catalyst ink during the drying of the membrane–electrode assemblies (MEAs). A core–shell structure that consisted of positively charged SiOH2 + groups and negatively charged –SO3 − in the Nafion ionomer was evaluated for its enhancement of the water content in the polymer membranes, as well as its effect on the specific activity of Pt. When an MEA has SiO2 nanoparticles only within the cathode catalyst layer under low humidity, the chemically-adsorbed water molecules on the silanol groups are released into the cathode catalyst layer, increasing the water content at the cathode catalyst layer, which increases the water transport from the cathode to the anode (i.e., back diffusion). The enhanced back diffusion mitigated the dehydration of the membrane under low humidity conditions. Furthermore, it is interesting to note that the core–shell structure between positively-charged SiOH2 + groups and negatively-charged –SO3 − groups in the Nafion ionomer may reduce the specific adsorption of –SO3 − groups on the surface of Pt, which enhances the kinetics of the oxygen reduction reaction (ORR) in the catalyst layer of the cathode.Keywords
This publication has 41 references indexed in Scilit:
- Hydrocarbon proton conducting polymers for fuel cell catalyst layersEnergy & Environmental Science, 2011
- Sulfonated poly(arylene ether sulfone) membrane containing sulfated zirconia for high-temperature operation of PEMFCsJournal of Materials Chemistry, 2011
- Membrane electrode assembly with Pt/SiO2/C anode catalyst for proton exchange membrane fuel cell operation under low humidity conditionsElectrochimica Acta, 2010
- Gas diffusion electrodes containing sulfonated poly (arylene ether) ionomer for polymer electrolyte fuel cellsElectrochimica Acta, 2010
- Study on behavior of plasma nitrided 316L in PEMFC working conditionsInternational Journal of Hydrogen Energy, 2008
- High temperature operation of PEMFC: A novel approach using MEA with silica in catalyst layerInternational Journal of Hydrogen Energy, 2008
- Gas diffusion electrodes containing sulfonated polyether ionomers for PEFCsElectrochimica Acta, 2007
- Effect of Copolymer Composition on the Oxygen Transport Properties of Sulfonated Poly(arylene ether sulfone) and Sulfonated Poly(sulfide sulfone) PEMsJournal of the Electrochemical Society, 2005
- Oxygen permeation studies on alternative proton exchange membranes designed for elevated temperature operationElectrochimica Acta, 2003
- Nafion ® /ORMOSIL nanocomposites via polymer-in situ sol–gel reactions. 1. Probe of ORMOSIL phase nanostructures by 29 Si solid-state NMR spectroscopyPolymer, 2002