Compatibilization of polypropylene/polyamide 6 blends using new synthetic nanosized talc fillers: Morphology, thermal, and mechanical properties
Authors:
- 11 February 2014
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 131 (13)
Abstract
New synthetic nanotalc and a commercially available natural fine talc (Luzenac© A3) were chosen in order to establish a comparative study in terms of their contributions on the improvement of the morphology as well as the final properties of PP/PA6 blends prepared by melt processing. At first, the TEM and SEM micrographs showed that both talc particles have a preferential affinity for the more hydrophilic polyamide 6 phase compared with the continuous PP matrix. Moreover, in both cases, the addition of talc fillers induces a significant decrease of the size of the PA6 domains but the better compatibilization efficiency was obtained in the presence of synthetic nanotalc particles. In this work, the positive change induced by the talc nanofillers on the crystallization kinetics and final morphology was highlighted. In addition, compared with natural talc, a highly level of dispersion of talc layers has been obtained with the synthetic nanotalc which is more hydrophilic. Thus, this better dispersion greatly improves the thermal stability of PP/PA6 blends and leads to better mechanical properties (+ 40% in Young's modulus). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40453.Keywords
This publication has 49 references indexed in Scilit:
- Use of new synthetic talc as reinforcing nanofillers for polypropylene and polyamide 6 systems: Thermal and mechanical propertiesJournal of Colloid and Interface Science, 2013
- Morphology and mechanical properties of PET/PE blends compatibilized by nanoclays: Effect of thermal stability of nanofiller organic modifierJournal of Applied Polymer Science, 2012
- “Cutting effect” of organoclay platelets in compatibilizing immiscible polypropylene/polystyrene blendsJournal of Zhejiang University-SCIENCE A, 2008
- PREFERENTIAL INTERCALATION BEHAVIOR OF CLAY AND ITS EFFECT ON THE THERMAL DEGRADATION IN IMMISCIBLE PP/PS BLENDSChinese Journal of Polymer Science, 2008
- Developing electrically conductive polypropylene/polyamide6/carbon black composites with microfibrillar morphologyJournal of Applied Polymer Science, 2007
- Thermal, morphological, and mechanical characteristics of polypropylene/polybutylene terephthalate blends with a liquid crystalline polymer or ionomerJournal of Applied Polymer Science, 2006
- Role of organically modified layered silicate as an active interfacial modifier in immiscible polystyrene/polypropylene blendsPolymer, 2004
- The relative role of coalescence and interfacial tension in controlling dispersed phase size reduction during the compatibilization of polyethylene terephthalate/polypropylene blendsJournal of Polymer Science Part B: Polymer Physics, 1997
- Compatibilizing effect of polyarylate-polyamide-6 block copolymers on polyarylate/polyamide-6 blends: 2Polymer, 1996
- Processing‐morphology relationships of compatibilized polyolefin/polyamide blends. Part I: The effect of an lonomer compatibilizer on blend morphologyPolymer Engineering & Science, 1988