Antimony hall sensors with W-Ti diffusion barriers for long-pulse operations in ITER and DEMO
Open Access
- 12 May 2026
- journal article
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (6)
Abstract
Reliable steady-state magnetic diagnostics are a prerequisite for plasma control in long-pulse fusion devices like ITER and DEMO, where inductive sensors are limited by integrator drift. While Antimony (Sb) Hall sensors offer the thermal resilience required for these harsh environments, previous designs have suffered from structural instability due to Copper diffusion into the sensing layer at elevated temperatures. This paper reports on the development of a fourth-generation Antimony Hall sensor incorporating a 500 nm Tungsten-Titanium (W-Ti) diffusion barrier. Accelerated aging tests confirm that the barrier effectively suppresses Copper migration at temperatures exceeding 300 °C, preventing the degradation observed in earlier iterations. The sensors demonstrate constant sensitivity across a ±2.5 T magnetic field range and linear temperature dependence in the broad temperature range around 100 °C. These results validate the sensor's suitability for the ITER Outer Vessel Steady-state Sensor (OVSS) system and establish a robust initial technological baseline for development of such sensors for the high-radiation, high-temperature environment of DEMO.Keywords
Funding Information
- Akademie Věd České Republiky (AV21 Research Program “Sustainable Energy”)
- Directorate-General XII, Science, Research, and Development (101052200 -EUROfusion)
- Technologická Agentura České Republiky (TK03030070)
This publication has 13 references indexed in Scilit:
- Engineering concept of the VNS - a beam-driven tokamak for component testingFusion Engineering and Design, 2025
- Antimony Hall sensor testing at ITER and DEMO relevant temperaturesFusion Engineering and Design, 2023
- Status of steady-state magnetic diagnostic for ITER and outlook for possible materials of Hall sensors for DEMOFusion Engineering and Design, 2019
- Prospects for the steady-state magnetic diagnostic based on antimony Hall sensors for future fusion power reactorsFusion Engineering and Design, 2019
- High magnetic field test of the ITER outer vessel steady-state magnetic field Hall sensors at ITER relevant temperatureReview of Scientific Instruments, 2018
- Development of Bismuth Hall sensors for ITER steady state magnetic diagnosticsFusion Engineering and Design, 2017
- Final design of the ITER outer vessel steady-state magnetic sensorsFusion Engineering and Design, 2017
- Properties of power electronic substrates based on thick printed copper technologyMicroelectronic Engineering, 2017
- High magnetic field test of bismuth Hall sensors for ITER steady state magnetic diagnosticReview of Scientific Instruments, 2016
- RIEMF in MgO and Al2O3 insulated MI cable ITER magnetic diagnostic coilsJournal of Nuclear Materials, 2004