An Empirical Study on the Upcycling of Glass Bottles into Hydrocyclone Separators
Open Access
- 26 July 2024
- journal article
- research article
- Published by MDPI AG in Separations
- Vol. 11 (8) , 230
Abstract
Cyclones are pivotal in mechanical process engineering and crucial in the complex field of separation technology. Their robustness and compact spatial requirements render them universally applicable and versatile across various industrial domains. Depending on the utilized fluid and field of application, both gas-based cyclones and hydrocyclones (HCs) are well established. Regarding HC design, enduring elongated flat cones have seen minimal alterations in shape and structure since their introduction over more than a hundred years ago. Experimental investigations regarding unconventional cone designs within scientific studies remain the exception. Therefore, this study focuses on alternative geometric configurations of the separation chambers and highlights their impact on separation and energy efficiency. To achieve this objective, different geometric shapes are investigated and retrofitted into HCs. The geometric foundation is derived from upcycled glass bottles. The repurposed bottles with a volume of 750 mL are used in conjunction with an inlet part, following the established Rietema design. Experimental tests are conducted with dilute phase separation, using 0.1–200 µm test particles in water. Comparisons between a bottle-based HC and a conventional Rietema design were conducted, establishing a benchmark against the standard. The findings revealed a noticeable correlation between separation efficiency and cone geometry. Conical designs demonstrated enhanced separation, particularly at lower volume flows. At the highest volume flow of 75 L min−1, the best performing bottle cyclones showed separation efficiencies of 78.5%, 78.4% and 77.9% and therefore are in a competitive range with 78.0% efficiency, achieved using the commercial Rietema design. Minimal disparities in cut sizes were observed in terms of separation grade efficiency among the models tested. Variations in separation efficiency and fractional efficiency curves indicated nuanced differences in classification efficiency.Keywords
This publication has 21 references indexed in Scilit:
- Investigation of the interaction of particulate matter and its separation from the gas flow in a multi-channel cyclone with recirculationGranular Matter, 2022
- Effects of curvature radius on separation behaviors of the hydrocyclone with a tangent-circle inletPowder Technology, 2017
- Numerical analysis of hydrocyclones with different conical section designsMinerals Engineering, 2014
- Numerical investigation of cone angle effect on the flow field and separation efficiency of deoiling hydrocyclonesHeat and Mass Transfer, 2012
- Effect of inlet shape and slurry temperature on the classification performance of hydro-cyclonesPowder Technology, 2004
- Handbuch der Mechanischen Verfahrenstechnik2002
- Hydrocyclones1992
- Performance and design of hydrocyclones—IIIChemical Engineering Science, 1961
- Performance and design of hydrocyclones—IVChemical Engineering Science, 1961
- Der Hydrozyklon. Ein einfaches und billiges Gerät für das Klassieren und EindickenChemie Ingenieur Technik, 1960