Acoustic Emission Analysis of the Cracking Behavior in ECC-LWSCC Composites
Open Access
- 9 January 2025
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (2) , 594
Abstract
Acoustic emission (AE) analysis was utilized to assess the cracking behavior of six lightweight self-consolidating concrete (LWSCC)–engineering cementitious composite (ECC) beams under flexural loading. Two control beams were fully cast with ECC containing either polyvinyl alcohol (PVA) fibers or steel fibers (SF). The remaining four beams were ECC-LWSCC composite beams, with the ECC layer containing PVA fibers or SF placed on either the tension or compression side. The results showed that the control beams had the highest ultimate load capacity, followed by beams repaired in tension, and then beams repaired in compression. PVA fibers exhibited higher performance compared to steel fibers at the first crack load, while steel fibers enhanced the beam’s performance at the ultimate load stage. During the flexural testing, AE parameters such as the number of hits, signal amplitude, and cumulative signal strength (CSS) were collected until failure. The analysis of these AE parameters was effective in detecting the first crack and evaluating cracking propagation in all beams. Changing the type of fibers (PVA and SF) in the ECC layer showed a significant effect on AE parameters. Moreover, adding a new ECC layer to an existing LWSCC layer resulted in variations in the signal amplitude. Finally, the flexural failure mode was confirmed with the aid of the rise time/maximum amplitude vs. average frequency analysis.Keywords
This publication has 43 references indexed in Scilit:
- Acoustic emission monitoring of reinforced concrete beams subjected to four-point-bendingApplied Acoustics, 2017
- The Use of Acoustic Emission Intensity Analysis for the Assessment of Cover Crack Growth in Corroded Concrete StructuresJournal of Nondestructive Evaluation, 2016
- Evaluation of damage progression in concrete structures due to reinforcing steel corrosion using acoustic emission monitoringJournal of Civil Structural Health Monitoring, 2015
- Damage classification in reinforced concrete beam by acoustic emission signal analysisConstruction and Building Materials, 2013
- Identification of Cracking Mechanisms in Scaled FRP Reinforced Concrete Beams using Acoustic EmissionExperimental Mechanics, 2012
- Tailoring ECC for Special Attributes: A ReviewInternational Journal of Concrete Structures and Materials, 2012
- An experimental study on cracking evolution in concrete and cement mortar by the b-value analysis of acoustic emission techniqueCement and Concrete Research, 2012
- Acoustic emission characterization of the fracture process in fibre reinforced concreteConstruction and Building Materials, 2011
- Crack classification in concrete based on acoustic emissionConstruction and Building Materials, 2010
- Acoustic emission behavior of steel fibre reinforced concrete under bendingConstruction and Building Materials, 2009