Modeling Fracture Properties for Heterogeneous Materials Using J-Integral
Open Access
- 2 November 2023
- conference paper
- Published by MDPI AG in Engineering Proceedings
- Vol. 56 (1) , 277
Abstract
The majority of classical methods which analyze the stability of existing cracks are based on theorems which calculate the forces in a state of limit equilibrium and do not take into consideration the deformation of the structure and the internal constraints thereof. This is not entirely consistent with what exactly happens in reality. For this purpose, we have proposed this study which analyzes the stability of cracks by the stress intensity factor through the calculation of the J-Integral, which is used in the calculation of the stress intensity factor. The stress intensity factor is a mechanical parameter, its values play a very important role in predicting the cracked state of the structure, and when it takes a certain value which is equal to the toughness of the material, the crack will cause the rupture of the structure. There are several methods for calculating the stress intensity factor. We have chosen to calculate it using the energy method because the direct calculation of the latter poses a problem because of the secularity of the flow around the crack. In this paper, we used the J-Integral and the energy release time to calculate the stress intensity factor. We also calculated using the laws of country the growth rate and the necessary number of cycles for the propagation of a crack.Keywords
Funding Information
- Directorate General for Scientific Research and Technological Development of the Algerian Ministry of Higher Education and Scientific Research
- Laboratory of development in mechanic and materials (LDMM) of Djelfa University
- Laboratory of Process and Materials Sciences (LSPM), University of Sorbonne Paris Nord
This publication has 3 references indexed in Scilit:
- A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and CracksJournal of Applied Mechanics, 1968
- Analysis of Stresses and Strains Near the End of a Crack Traversing a PlateJournal of Applied Mechanics, 1957
- VI. The phenomena of rupture and flow in solidsPhilosophical Transactions of the Royal Society A, 1921