Microstructure and Mechanical Properties of Spark Plasma Sintered TaC 0.7 Ceramics
Authors:
- 2 July 2010
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 93 (10) , 2945-2947
Abstract
The TaC 0.7 composition was spark plasma sintered (SPS) at 1600°–1900°C using TaC and Ta as the starting powders. Densification process, phase evolution, microstructure development, and the mechanical properties of the composites were investigated. The results indicated that the TaC 0.7 composition could be SPS to >95% of theoretical density in 5 min at 1600°C or above. The phase formation was associated with carbon diffusion from the starting particles TaC to Ta to form Ta 2 C and Ta 6 C 5 as intermediate phases, and subsequently the equilibrium phases of TaC y and ζ‐Ta 4 C 3− x . The presence of lamellar ζ‐Ta 4 C 3− x regions enhanced the flexure strength (up to 972 MPa) and fracture toughness (up to 13.8 MPa·m 1/2 ).Keywords
This publication has 14 references indexed in Scilit:
- Pressureless Sintering of Tantalum Carbide Ceramics without AdditivesJournal of the American Ceramic Society, 2010
- Mechanical properties and rapid consolidation of binderless nanostructured tantalum carbideCeramics International, 2009
- Phase Constitution and Mechanical Properties of Carbides in the Ta–C SystemJournal of the American Ceramic Society, 2009
- Reaction Processing of Ultra‐High Temperature W/Ta2C‐Based CermetsJournal of the American Ceramic Society, 2009
- Densification, Mechanical Properties, and Oxidation Resistance of TaC–TaB 2 CeramicsJournal of the American Ceramic Society, 2008
- Atomic and vacancy ordering in carbide ζ-Ta4C3−x (0.28⩽x⩽0.40) and phase equilibria in the Ta–C systemJournal of Solid State Chemistry, 2007
- Hot Pressing of Tantalum Carbide With and Without Sintering AdditivesJournal of the American Ceramic Society, 2007
- Synthesis and microstructure of tantalum carbide and carbon composite by liquid precursor routeScripta Materialia, 2006
- On the preparation of bio-, nano- and structural ceramics and composites by spark plasma sinteringSolid State Sciences, 2003
- Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)Materials Science and Engineering: A, 2000