Enhancing the thermoplastic behavior and mechanical performance of recycledHDPE/CaCO3composites using oxidized polyethylene
Author:
- 17 April 2023
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (23)
Abstract
There is a growing interest in sustainable materials based on recycled or natural feedstocks for the circular economy. Ideally, thermoplastic materials are anticipated to show appropriate melt‐flow behavior for thermo‐mechanical recycling, good melt stability, and mechanical performance. Thermoplastic polyolefins such as polyethylenes are used as single‐use packaging materials and generate environmental concerns. This article reports the melt‐processing and characterization of composite materials based on recycled high‐density polyethylene (rHDPE) and naturally abundant calcium carbonate (CaCO3) mineral at various mass ratios such as 70/30, 50/50, and 30/70. Oxidized polyethylene (OPE) is used as an additive, with 20 wt% replacement of rHDPE, to improve the materials' mechanical performance and thermoplastic behavior. Various characteristics such as tensile, viscoelastic, melt‐flow, phase morphology, and thermomechanical recyclability of the materials are analyzed. It reveals that composites with high CaCO3content compatibilized with OPE show improved tensile strength and modulus. For example, the composite based on 10/70/20 (wt%) of rHDPE/CaCO3/OPE shows an average tensile strength of 27.4 MPa and Young's modulus of 4.5 GPa, in contrast to the rHDPE sample, which shows an average tensile strength of 12.4 MPa and Young's modulus of 967 MPa. Notably, adding OPE decreases the melt‐viscosity of the rHDPE/CaCO3materials, thus improving the composites' melt‐flow and thermoplastic behavior. This study indicates the possibility of developing natural CaCO3‐rich polymer composites with thermoplastic behavior for real‐life applications with superior mechanical and melt‐flow properties suitable for thermomechanical recycling.Keywords
Funding Information
- National Institute of Standards and Technology (70NANB19H139)
This publication has 59 references indexed in Scilit:
- A Review of Sustainable Materials for Acoustic ApplicationsBuilding Acoustics, 2012
- Investigation of Cross-Linked and Additive Containing Polymer Materials for Membranes with Improved Performance in Pervaporation and Gas SeparationMembranes, 2012
- A simple approach to polymer mixture miscibilityPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2010
- Nanoscale particles for polymer degradation and stabilization—Trends and future perspectivesProgress in Polymer Science, 2009
- Effect of both uncoated and coated calcium carbonate on fracture toughness of HDPE/CaCO3 nanocompositesJournal of Applied Polymer Science, 2007
- Mechanical and morphological properties of recycled high‐density polyethylene, filled with calcium carbonate and fly ashJournal of Applied Polymer Science, 2006
- On enhanced impact strength of calcium carbonate-reinforced high-density polyethylene compositesMaterials Science and Engineering: A, 2005
- Rheological properties of ionically crosslinked poly(propylene)‐type thermoplastic elastomersJournal of Applied Polymer Science, 2002
- The influence of morphology on the dielectric and dynamic mechanical behavior of a linear low-density polyethyleneJournal of Polymer Science: Polymer Physics Edition, 1985
- Dynamic mechanical relaxations in polyethyleneMacromolecules, 1985