Influence of Mold Temperature Associated with Glass Fiber on the Mechanical and Thermal Properties of a (PA6/GF/MMT) Nanocomposite
Authors:
- Renato Adriano DamianiRDRenato Adriano Damiani
- Glaucea Warmeling DuarteGDGlaucea Warmeling Duarte
- Luciano Luiz SilvaLSLuciano Luiz Silva
- Josiane Maria Muneron de MelloJMJosiane Maria Muneron de Mello
- Eduardo Roberto BatistonEBEduardo Roberto Batiston
- Humberto Gracher RiellaHRHumberto Gracher Riella
- Márcio Antônio FioriMFMárcio Antônio Fiori
Open Access
- 1 January 2017
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 22 (1)
Abstract
This work describes the second of a series of studies of the effects of injection molding conditions on the mechanical and thermal properties of Polyamide 6/Glass Fiber/Montmorillonite (PA6/GF/MMT) composites and was motivated by the lack of information about how the processing variables influence on the properties of three-phase composites containing fiber glass. By this time, the effects of the injection molding temperature associated with the fiber glass percentage on the mechanical and thermal properties of the composite are investigated. Some samples were processed, following a statistical experimental factorial planning, varying the mold temperature and the fiber glass percentage and maintaining 5 wt % of the MMT. The samples were submitted to tensile and flexural tests, XRD, SEM and DSC. The studies showed that an increase in the mold temperature and the fiber percentage improves the maximum tensile and flexural stresses. The increased mold temperature slows the cooling rate, which, over time, decreases the degree of crystallinity. However, there is an increase in the intercalation of the polymeric chains and the nanoclay lamellae, and the structure forms with fewer defects.Keywords
This publication has 22 references indexed in Scilit:
- Effect of organoclay and preparation methods on the mechanical/thermal properties of microcellular injection molded polyamide 6-clay nanocompositesInternational Communications in Heat and Mass Transfer, 2011
- The effects of Clay on fire performance and thermal mechanical properties of woven glass fibre reinforced polyamide 6 nanocompositesComposites Science and Technology, 2010
- Effect of Different Concentrations and Sizes of Particles of Rice Husk Ash - RHS in the Mechanical Properties of PolypropyleneMaterials Science Forum, 2010
- Fibre reinforced nanocomposites: Mechanical properties of PA6/clay and glass fibre/PA6/clay nanocompositesPolymer, 2010
- Nanoclay synergy in flame retarded/glass fibre reinforced polyamide 6Polymer Degradation and Stability, 2009
- Layered silicates nanocomposite matrix for improved fiber reinforced composites propertiesComposites Science and Technology, 2009
- Thermo-XRD and differential scanning calorimetry to trace epitaxial crystallization in PA6/montmorillonite nanocompositesMaterials Letters, 2009
- Preparation and characterization of UV-cured epoxy nanocomposites based on o-montmorillonite modified with maleinized liquid polybutadienesPolymer, 2007
- A study of the mechanical behaviour of a glass fibre reinforced polyamide 6,6: Experimental investigationPolymer Testing, 2006
- Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materialsMaterials Science and Engineering: R: Reports, 2000