A preliminary study on hydraulic resistance of bentonite/host-rock seal interface
Authors:
- Y.-G. ChenYCY.-G. Chen
- Y.-J. CuiYCY.-J. Cui
- A.M. TangATA.M. Tang
- Q. WangQWQ. Wang
- W.-M. YeWYW.-M. Ye
- 1 December 2014
- journal article
- Published by Emerald Publishing in Géotechnique
- Vol. 64 (12) , 997-1002
Abstract
Compacted bentonite-based materials are often used as buffer materials in radioactive waste disposal. When the compacted bentonite blocks are emplaced, technological voids related to different interfaces involving the buffer material are created, and their hydro-mechanical behaviour is of primary importance for the safety of disposal. In this study, the hydraulic resistance of the interface between compacted MX80 bentonite and Boom Clay is investigated in the laboratory using an injection cell. The results obtained show that when water is injected, the technological gap is quickly reduced due to the bentonite swelling. When water pressure reaches the hydraulic resistance of the interface, hydraulic fracturing takes place with a drastic pressure decrease. After fracturing, water injection continues and bentonite continues to swell. A higher subsequent pressure is needed to produce a new hydraulic fracturing. After a certain time, the hydraulic resistance becomes high enough so that no further fracturing occurs, suggesting that the technological gap is sealed.Keywords
This publication has 9 references indexed in Scilit:
- Experimental investigation on the thermal volumetric behavior of highly compacted GMZ01 BentApplied Clay Science, 2013
- Hydraulic conductivity and microstructure changes of compacted bentonite/sand mixture during hydrationEngineering Geology, 2013
- The effects of technological voids on the hydro-mechanical behaviour of compacted bentonite–sand mixtureSoils and Foundations, 2013
- Eu(III) adsorption using di(2-thylhexly) phosphoric acid-immobilized magnetic GMZ bentoniteChemical Engineering Journal, 2012
- Advances on the knowledge of the buffer/backfill properties of heavily-compacted GMZ bentoniteEngineering Geology, 2010
- Design and development of large-scale in-situ PRACLAY heater test and horizontal high-level radioactive waste disposal gallery seal test in Belgian HADESJournal of Rock Mechanics and Geotechnical Engineering, 2010
- Thermo-hydro-mechanical simulation of ATLAS in situ large scale test in Boom ClayComputers and Geotechnics, 2009
- Determining the unsaturated hydraulic conductivity of a compacted sand–bentonite mixture under constant-volume and free-swell conditionsPhysics and Chemistry of the Earth, Parts A/B/C, 2008
- A laboratory study of the self sealing behaviour of a compacted sand–bentonite mixtureGeomechanics and Geoengineering, 2006