Rotary Kiln Slow Pyrolysis for Syngas and Char Production From Biomass and Waste—Part I: Working Envelope of the Reactor
- 4 January 2007
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 129 (4) , 901-907
Abstract
A microscale electrically heated rotary kiln for slow pyrolysis of biomass and waste was designed and built at the University of Perugia. The reactor is connected to a wet scrubbing section, for tar removal, and to a monitored combustion chamber to evaluate the lower heating value of the syngas. The system allows the evaluation of gas, tar, and char yields for different pyrolysis temperatures and residence times. The feeding screw conveyor and the kiln are rigidly connected; therefore, a modification of the flow rate implies a modification of the inside solid motion and of residence time. The paper provides the theoretical and experimental calculation of the relationships between residence time and flow rate used to determine the working envelope of the reactor as a function of the feedstock bulk density and moisture content, given the actual heat rate of the electric heaters. The methodology is extendable to any rotary kiln reactor with a rigidly connected feeding screw conveyor, given its geometric and energetic specifications. Part II of the paper will extend the energy balance, also introducing the yields of pyrolysis products.Keywords
This publication has 10 references indexed in Scilit:
- Integrated Pyrolysis Regenerated Plant (IPRP): An Efficient and Scalable Concept for Gas Turbine Based Energy Conversion From Biomass and WasteJournal of Engineering for Gas Turbines and Power, 2005
- IPRP (Integrated-Pyrolysis Regenerated Plant): Gas turbine and externally heated rotary-kiln pyrolysis as a biomass and waste energy conversion system. Influence of thermodynamic parametersProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2003
- Axial transport and residence time of MSW in rotary kilns: Part II. Theoretical and optimal analysesPowder Technology, 2002
- Axial transport and residence time of MSW in rotary kilnsPowder Technology, 2002
- The transverse motion of solids in rotating cylinders—forms of motion and transition behaviorPowder Technology, 2001
- Principles and practice of biomass fast pyrolysis processes for liquidsJournal of Analytical and Applied Pyrolysis, 1999
- Influences of model assumptions on the predictions of cellulose pyrolysis in the heat transfer controlled regimeFuel, 1996
- Modelling of the pyrolysis of biomass particles. Studies on kinetics, thermal and heat transfer effectsThe Canadian Journal of Chemical Engineering, 1991
- The transverse motion of solids moving through rotary kilnsPowder Technology, 1979
- Continuous flow systemsChemical Engineering Science, 1953