Al-Fe-Ni Metallic Glasses via Mechanical Alloying and Its Consolidation
Open Access
- 19 October 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (20) , 10561
Abstract
In this paper, the influence of mechanical milling on the microstructural evolution and magnetic properties of Al82Fe14Ni4 alloys prepared by mechanical alloying is investigated. The elemental powder mixture was processed under argon gas at 250 rpm and 350 rpm using a planetary ball mill. The powder particles experienced severe deformation, fragmentation and mutually cold-welding during the collisions of the balls. The diffraction peaks of the Al, Fe and Ni phases gradually disappeared during the milling process, and a halo peak corresponding to the amorphous phase formed. The amorphization of powders milled at 250 rpm was slower than that of 350 rpm. These alloys achieved a fully amorphous structure after milling for 60 h. The amorphous powder alloy milled at 350 rpm exhibited higher thermal stability compared with that of an alloy milled at 250 rpm. The saturation magnetization and coercive of the milled Al82Fe14Ni4 alloy powder were decreased following the formation of a para-magnetic amorphous phase. The highest compressive strength, about 710 MPa, was obtained for the Al82Fe14Ni4 alloy sintered at 600 °C by SPS.Keywords
Funding Information
- Ministry of Industry and Trade of the Socialist Republic of Vietnam (ĐT.BO.107/2, 107.2021.ĐT.BO.HĐKHCN)
This publication has 51 references indexed in Scilit:
- Anomalous Hall effect in epitaxially grown ferromagnetic FeGa/Fe3Ga hybrid structure: Evidence of spin carrier polarized by clustersJournal of Applied Physics, 2013
- Electric Current Activation of Sintering: A Review of the Pulsed Electric Current Sintering ProcessJournal of the American Ceramic Society, 2010
- Developing aluminum-based bulk metallic glassesPhilosophical Magazine, 2010
- High-strength Al87Ni8La5 bulk alloy produced by spark plasma sintering of gas atomized powdersJournal of Materials Research, 2009
- Synthesis and Properties of Al‐Ni‐La Bulk Metallic GlassAdvanced Engineering Materials, 2009
- From clusters to phase diagrams: composition rules of quasicrystals and bulk metallic glassesJournal of Physics D: Applied Physics, 2007
- Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying ElementMATERIALS TRANSACTIONS, 2005
- Amorphous aluminum alloys—synthesis and stabilityJOM, 2002
- Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systemsProgress in Materials Science, 1998
- Recent progress in amorphous metallic materials in JapanMaterials Science and Engineering: A, 1994