The joint properties of dissimilar aluminum plates joined by friction stir welding
Authors:
- 1 May 2010
- journal article
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 101 (5) , 692-699
Abstract
Friction stir welding (FSW) can be used to join dissimilar Al alloys which have different mechanical properties without causing any weld zone defects under a wide range of welding conditions. In this study, AA2024 and AA5052 aluminum alloys were successfully joined together using FSW. FSW process parameters such as tool rotational speed and traverse speed were varied to explore their effects on the microstructural and mechanical properties of welded couples. Tension and fatigue tests were carried out and hardness measurements were conducted on cross-sections of the weld zones. Fatigue tests were performed using a fatigue test machine and the fatigue strength was analyzed by drawing S–N curves and critically observing fatigue fracture surfaces of the tested samples. The microstructures of the alloys and fracture surfaces were examined by optical and scanning electron microscopy. Experimental results indicate that microstructural and mechanical properties are significantly affected by changing welding parameters within the chosen range of conditions.Keywords
This publication has 30 references indexed in Scilit:
- Mechanical analysis of ultra-thin friction stir welding joined sheets with dissimilar and similar materialsMaterials & Design (1980-2015), 2008
- The tensile deformation and fracture behavior of friction stir welded aluminum alloy 2024Materials Science and Engineering: A, 2007
- Fatigue behaviour of Al2024-T3 friction stir welded lap jointsEngineering Fracture Mechanics, 2007
- Effect of friction stir processing on the fatigue properties of a Zr-modified 2014 aluminium alloyMaterials Characterization, 2006
- Mechanical and microstructural behaviour of 2024–7075 aluminium alloy sheets joined by friction stir weldingInternational Journal of Machine Tools and Manufacture, 2006
- Banded microstructure in 2024-T351 and 2524-T351 aluminum friction stir weldsMaterials Science and Engineering: A, 2004
- The improvement of mechanical properties of friction-stir-welded A356 Al alloyMaterials Science and Engineering: A, 2003
- Three-dimensional modeling of the friction stir-welding processInternational Journal of Machine Tools and Manufacture, 2002
- Mechanical response of friction stir welded AA2024: experiment and modelingMaterials Science and Engineering: A, 2002
- Friction stir welding for the transportation industriesMaterials & Design (1980-2015), 1997