Abstract
Introduction: Currently, electromagnetic navigation systems are mainly used in the procedures of the frontal skull base. Within the scope of a cadaver ex vivo study, we used the navigation system InstaTrak 3500 of the GE Medical® Company to evaluate the possibility of using electromagnetic navigation systems in lateral skull base procedures. Material and Methods: We prepared 10 cadavers each with 9 miniosteosynthesis screws. All of them were brought to the Neuroradiology Institute for Imaging (CAT-Scan). Five of the screws were used for the registration and four of them for controlling the accuracy of the navigation system. For the referencing of the head, a 4-mm hole was drilled into the calotte and an adaptor pin was placed into it. The electromagnetic transponder was then fixed on this screw. For the navigation exclusively designed instruments can be used. We noted the time involved for preparation. Further, both precision and sources of error were examined using different registration methods. Results: The preparation time varied between 15 and 28 minutes, the fixation of the bone-anchored referencing pin (9 to 22 minutes) taking the longest. The pointer was mainly used for navigation. The available navigable instruments (dummy, Blakesley) are optimized for interventions in the area of the front skull base and therefore their use was limited in the much tinier anatomy of the lateral skull base. Intraoperative attainable accuracy, measured at different anatomical landmarks, was within 0.8 and 1.6 mm. A source of error was the electromagnetic interference that occurred when the microscope was too close to the transponder (less than 10 cm). Electromagnetic interference decreases intraoperative navigation accuracy. However, the navigation system was able to recognize such a condition and sent a warning sound. By correcting the distance this error was easily corrected by the surgeon. Conclusions: The application of the electromagnetic navigation system is possible in the lateral skull base surgery. Modifications of the reference pin as well as the development of adjusted instruments for the lateral skull base procedures are works in progress.