Comprehensive Coupled Modeling Analysis of Stimulations and Post-Frac Productivity—Case Study of a Tight Gas Field in Wyoming
Authors:
- 19 January 2009
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
This paper presents a new methodology of coupled hydraulic fracturing, geomechanical and reservoir modeling, and an example of integrated analysis of a tight gas well. The new modeling technology and its advantages in field application are demonstrated on a case study of a "science well?? in a tight gas Wyoming field. A detailed model of the well included its entire fracturing and production history, and was constrained by a large amount of field measurements. The model was successfully history matched to all of this data using a common reservoir description. This novel approach thus results in much higher level of confidence compared to using uncoupled models with different assumptions. The history matching process provided insight in the mechanics of fracturing and flow in this field, and the importance of geomechanical effects. Some of the most important findings are that the formation permeability is highly stress sensitive and increases dramatically during frac injection, fracture length and conductivity is highly variable during flowbacks, and geomechanical effects on conductivity are still evident after several months of production. The calibrated model was then used to assess the gains in productivity possible from improved technology of fracturing, resulting in larger conductivity and length of fractures.Keywords
This publication has 9 references indexed in Scilit:
- Hydraulic Fracture Predictions with a Fully Coupled Geomechanical Reservoir Simulator2008
- A Novel Hydraulic Fracturing Model Fully Coupled With Geomechanics and Reservoir Simulator2007
- A New Approach to Hydraulic Fracturing Modeling— Fully Coupled With Geomechanical and Reservoir Simulation2006
- Evaluation of Nonlinear Fracture Relative Permeabilities and Their Impact on Water-Frac Performance in Tight Gas Sands2006
- How To Approximate Effects of Geomechanics in Conventional Reservoir Simulation2005
- Application of Mini-Falloff Test to Determine Reservoir Parameters and Optimize Fracture Designs in a Tight Gas Field2004
- The Modeling of the Effect of Water Blockage and Geomechanics in Waterfracs2002
- Brine Disposal Into a Tight Stress-Sensitive Formation at Fracturing Conditions: Design and Field ExperienceSPE Reservoir Evaluation & Engineering, 1999
- Determination of the Effective Stress Law for Permeability and Deformation in Low-Permeability RocksSPE Formation Evaluation, 1992