Performances and Limitations of Metal Supported Cells with Strontium Titanate based Fuel Electrode
Authors:
- 7 June 2018
- journal article
- research article
- Published by Wiley in Fuel Cells
- Vol. 18 (3) , 251-259
Abstract
In this contribution, we report investigation of metal supported cells with a La0.1Sr0.9TiO3–α (LST) based fuel electrode. The cells are prepared on a substrate made of a porous NiCrAl metal foam infiltrated with NiO and LST materials. The functional anode layer, consisting of LST mixed with a Gd0.1Ce0.9O2–α (GDC), is produced by screen printing. Nickel metal is infiltrated in the backbone to enhance electronic and catalytic properties. The electrolyte made of an 1 μm + 0.5µm thick Zr0.84Y0.16O2–α (YSZ) layer followed by a 2 μm thick GDC layer, is fabricated by wet ceramic processing and electron beam physical vapor deposition (EB‐PVD), respectively. La0.6Sr0.4Co0.2Fe0.8O3–α (LSCF) is employed as a cathode material. All cells are electrochemically characterized. At 750 °C and at a cell voltage of 0.7 V, the typically achieved power density value is up to 0.40 W cm−2. With less than 2% variation for 50 cycles, the OCV showed an excellent stability as a function of redox cycles, demonstrating that an electrolyte as thin as 3 µm maintains its integrity, despite the harsh operating conditions. This highlights the potential of perovskite based fuel electrodes in metal supported cells, and paves the way to the next generation of cells' design.Keywords
Funding Information
- Seventh Framework Programme (303429)
This publication has 52 references indexed in Scilit:
- Scale Up and Anode Development for La ‐Doped SrTiO 3 Anode‐Supported SOFC sJournal of the American Ceramic Society, 2013
- A Review of RedOx Cycling of Solid Oxide Fuel Cells AnodeMembranes, 2012
- La-doped SrTiO3 as anode material for IT-SOFCSolid State Ionics, 2011
- Factors affecting limiting current in solid oxide fuel cells or debunking the myth of anode diffusion polarizationJournal of Power Sources, 2011
- Nano-structured solid oxide fuel cell design with superior power output at high and intermediate operation temperaturesMicrosystem Technologies, 2011
- Effect of Current Collecting Materials on the Performance of the Double-Perovskite Sr2MgMoO6-δ AnodeJournal of the Electrochemical Society, 2011
- RedOx study of anode-supported solid oxide fuel cellJournal of Power Sources, 2009
- Fuel-flexible operation of a solid oxide fuel cell with Sr0.8La0.2TiO3 supportJournal of Power Sources, 2008
- Performance of metal-supported SOFCs with infiltrated electrodesJournal of Power Sources, 2007
- Effect of contact between electrode and current collector on the performance of solid oxide fuel cellsSolid State Ionics, 2003