The Effects of Cylinder Wall Surface Roughness and Bore Distortion on Blow-by in Automotive Engines
Authors:
- 1 January 1995
- journal article
- research article
- Published by Taylor & Francis in Tribology Transactions
- Vol. 38 (4) , 966-972
Abstract
A laboratory test device, was developed to study the effects of cylinder wall, surface roughness and bore, distortion on blow-by in automotive engines. The test device was constructed of components from a four-cylinder engine with a test box welded into the engine block to take the place of one of the cylinders. Removable liners used in the lest box were honed to varying surface roughnesses and bore distortion levels, Blow-by, used as a measure of conformance between the piston rings and cylinder walls, was found to increase at the end of the test with increasing initial distortion and initial surface roughness.Keywords
This publication has 4 references indexed in Scilit:
- Effect of Cylinder Bore Out-of-Roundness on Piston Ring Rotation and Engine Oil ConsumptionSAE International Journal of Advances and Current Practices in Mobility, 1993
- Ring Dynamics in a Diesel Engine and Its Effect on Oil Consumption and Blow bySAE International Journal of Advances and Current Practices in Mobility, 1983
- Blow-By in Relation to Piston and Ring FeaturesSAE International Journal of Advances and Current Practices in Mobility, 1981
- Piston Ring Motion and Its Influence on Engine TribologySAE International Journal of Advances and Current Practices in Mobility, 1979