Numerical Analysis of Wooden Porous Media Effects on Heat Transfer From a Staggered Tube Bundle
- 1 January 2008
- journal article
- research article
- Published by Wiley in Journal of Heat Transfer
- Vol. 130 (1) , 014501
Abstract
A numerical analysis of forced convective heat transfer from a staggered tube bundle with various low conductivity wooden porous media inserts at maximum Reynolds numbers 100 and 300, Prandtl number 0.7, and Darcy number 0.25 is presented. The tubes are at constant temperature. The extended Darcy–Brinkman–Forchheimer equations and corresponding energy equation are solved numerically using finite volume approach. Parametric studies are done for the analysis of porous medium thermal conductivity and Reynolds number on the local Nusselt number distribution. Three different porous media with various solid to fluid thermal conductivity ratios 2.5, 5, and 7.5 are used in the numerical analysis. The results are compared with the numerical data for tube bundles without porous media insert and show that the presence of wooden porous media can increase the heat transfer from a tube bundle significantly (more than 50% in some cases). It is shown that high conductivity porous media are more effective than the others for the heat transfer enhancement from a staggered tube bundle. However, the presence of a porous medium increases the pressure drop. Therefore, careful attention is needed for the selection of a porous material with good heat transfer characteristics and acceptable pressure drop.Keywords
This publication has 21 references indexed in Scilit:
- An experimental and numerical study on heat transfer enhancement for gas heat exchangers fitted with porous mediaInternational Journal of Heat and Mass Transfer, 2004
- Fluid Flow and Heat Transfer around Circular Cylinders in the Presence and No-Presence of Porous MediaJournal of Porous Media, 2004
- Non-Darcy natural convection in high porosity metal foamsInternational Journal of Heat and Mass Transfer, 2002
- Longitudinal flow past cylinders arranged in a triangular arrayApplied Mathematical Modelling, 1999
- Order of accuracy of QUICK and related convection-diffusion schemesApplied Mathematical Modelling, 1995
- Forced convection from a surface covered with flexible fibersInternational Journal of Heat and Mass Transfer, 1995
- Empirical correlation equations for heat transfer by forced convection from cylinders embedded in porous media that account for the wall effect and dispersionInternational Journal of Heat and Mass Transfer, 1993
- Flow and heat transfer control over an external surface using a porous block array arrangementInternational Journal of Heat and Mass Transfer, 1993
- Enhanced Heat Transfer, Missing Pin, and Optimization for Cylindrical Pin Fin ArraysJournal of Heat Transfer, 1993
- Analysis of Surface Enhancement by a Porous SubstrateJournal of Heat Transfer, 1990