Modal Analysis and Output Characteristics of an Ultrasonic Motor With a Square Prismatic Shell Stator
Authors:
- 1 April 2024
- journal article
- research article
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 146 (2) , 1-13
Abstract
A rotary traveling wave ultrasonic motor having a square prismatic shell stator is proposed. The stator contacts with the rotor through interference fit, and elastically deforms slightly, and then presses against the rotor. Then the pre-pressure is created by the initial deformation of the stator with simple structure. The in-plane modal problem of the stator is analyzed by numerical method as a folded beam and the results are compared with those from finite element method (FEM) and laser doppler measurement. The 3rd and 5th degenerate modes with repeat natural frequencies are selected as working modes, and the influence of actuating frequency and voltage on the no-load speed and stall torque is studied by multi-physics simulation for the operation of these two modes. A prototype is fabricated and the output characteristics were tested and compared with the simulated results. The 3rd working mode is found to have better performance and can reach a no-load speed of 205 rpm and maximum torque of 3.9 mN·m when the input is 28.0 kHz and 100V. The effect of the pre-pressure for the 3rd working mode is discussed further.Keywords
Funding Information
- National Natural Science Foundation of China (51705519)
This publication has 18 references indexed in Scilit:
- A brief review on the recent evolution in piezoelectric linear ultrasonic motorsEngineering Research Express, 2021
- A review on piezoelectric ultrasonic motors for the past decade: Classification, operating principle, performance, and future work perspectivesSensors and Actuators A: Physical, 2020
- Micro ultrasonic motor using a one cubic millimeter statorSensors and Actuators A: Physical, 2014
- Standing wave brass-PZT square tubular ultrasonic motorUltrasonics, 2012
- A cylindrical standing wave ultrasonic motor using bending vibration transducerUltrasonics, 2011
- The study of the dynamic contact in ultrasonic motorApplied Mathematical Modelling, 2010
- Motional characteristics of thin piezoelectric rotary motor using cross shaped statorJournal of Electroceramics, 2008
- Performance evaluation of traveling wave ultrasonic motor based on a model with visco-elastic friction layer on statorUltrasonics, 2006
- Miniature piezoelectric motorsSensors and Actuators A: Physical, 2003
- A miniature piezoelectric ultrasonic motor based on circular bending vibration modeIEEE/ASME Transactions on Mechatronics, 2000