A comprehensive analysis to assess the impact of nano MoS2 on the wear characteristic of Al-TiB2-Gr composite
Open Access
- 1 January 2022
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 9 (1) , 016525
Abstract
The present study evaluates the influence of nano MoS2 particles on the wear properties of newly developed TiB2 and Graphite reinforced Aluminium composite. Micro particles of MoS2 are downsized into nano levels using a planetary ball mill. Three different compositions of specimens are fabricated through stir casting, with a constant 10% of weight of TiB2, graphite, and nano MoS2 is kept at varying amounts of 10, 15, and 20%. The dry sliding wear tests are executed by following Taguchi’s design of experiment. The wear rate and coefficient of friction are considered as responses, whereas the normal load, sliding distance and the composition of MoS2 are considered as the chief parameters with three levels. The hybridized Taguchi-Grey Relational -Principal Component Analysis mathematical model is implemented to study the effect of wear parameters and inclusion of MoS2 on the wear behavior. Mathematical and experimental results explore the increasing nano MoS2 content reduces the wear rate and coefficient of friction of composites. Analysis of variance results also acknowledge that nano MoS2 content in the composite is a remarkable parameter to impact the tribological property. The hybrid statistical model results explore that the optimum parameter to yield better tribological property are 30 N normal load, 2 km sliding distance and 20% of MoS2. Worn surfaces are analyzed using scanning electron microscopy to picturize the wear mechanism concerning the varying content of reinforcement.Keywords
Funding Information
- The Deanship of Scientific Research, King Khalid University (KKU), Abha-61421, Asir, Kingdom of Saudi Arabia (R.G.P1./123/43.)
This publication has 51 references indexed in Scilit:
- Effect of matrix alloy and influence of SiC particle on the sliding wear characteristics of aluminium alloy compositesMaterials & Design (1980-2015), 2010
- RETRACTED: Dry sliding wear behaviour of cast high strength aluminium alloy (Al–Zn–Mg) and hard particle compositesWear, 2009
- Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite composites produced by in situ powder metallurgy methodWear, 2009
- High-temperature mechanical properties of aluminium alloys reinforced with boron carbide particlesMaterials Science and Engineering: A, 2009
- Effect of composition on friction coefficient of Cu–graphite compositesWear, 2008
- The use of a grey-based Taguchi method for optimizing multi-response simulation problemsEngineering Optimization, 2008
- Dry sliding wear behavior of Mg2Si/Al composites against automobile friction materialWear, 2008
- Dry sliding friction and wear properties of B4C particulate-reinforced Al-5083 matrix compositesWear, 2008
- Mechanical Behavior of Silicon Carbide/2014 Aluminum Composite1988
- Control problems of grey systemsSystems & Control Letters, 1982