Effect of Hydrohalogenation of Metal/Zeolite Catalysts for Cyclohexene Hydroconversion ‐Part 3‐ Pd/H‐ZSM‐5 Catalysts
Author:
- 1 October 2007
- journal article
- research article
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 54 (5) , 1211-1222
Abstract
Cyclohexene (CHE) hydroconversion was performed in a flow reactor at atmospheric pressure and temperatures of 50–400 °C using: Pd/H‐ZSM‐5, Pd/H‐ZSM‐5(HCl), and Pd/H‐ZSM‐5(HF) catalysts. These catalysts were characterized for acid site strength distribution via NH3 TPD, Pd dispersion via H2 chemisorption, TPR via reduction of the metal oxide in the catalysts and XRD for tracing crystallinity The hydroconversion steps proceeded as follows: CHE → Cyclohexane (CHA); CHE → Methylcyclopentenes (MCPEs) → Methylcyclopentane (MCPA); CHE → Cyclohexadienes (CHDEs) → Benzene → Alkylbenzenes; CHE and others → Hydrocrackedproducts.The overall hydroconversion of CHE was achieved in the catalyst order: Pd/H‐ZSM‐5 > Pd/H‐ZSM‐5(HF) > Pd/H‐ZSM‐5(HCl). CHE hydrogenation step was the major reaction at low temperatures which significantly inhibited via HCl treatment, but slightly enhanced via HF treatment. At medium temperatures, on all catalysts, isomerisation to MCPEs and MCPA increase to a maximum then a decline with a further increase of temperature. The overall isomerisation of CHE was highest on the untreated catalyst. During the higher temperature range, dehydrogenation, alkylation and hydrocracking were increased with temperature. Dehydrogenation of CHE always yielded larger amounts of 1,3‐CHDE than 1,4‐CHDE. These cyclohexadienes were produced in the catalyst order: Pd/H‐ZSM‐5(HF) > Pd/H‐ZSM‐5(HCl) > Pd/H‐ZSM‐5. In general, benzene alkylation to toluene exceeded that of xylenes, indicating that the second methylation is more difficult than the first. However, the catalytic activities for benzene and toluene production were in the order: Pd/H‐ZSM‐5 » Pd/H‐ZSM‐5(HCl) > Pd/H‐ZSM‐5(HF), whereas for xylenes production, Pd/H‐ZSM‐5 » Pd/H‐ZSM‐5(HF) > Pd/H‐ZSM‐5(HCl). Intrapore diffusion plays an important role during the dehydrogenation reactions as well as during the interconversion of individual aromatic hydrocarbons.Keywords
This publication has 37 references indexed in Scilit:
- Iridium/H-ZSM-5 zeolite catalyst promoted via hydrochlorination or hydrofluorination for the hydroconversion of cyclohexeneApplied Catalysis A: General, 2006
- Effect of hydrochlorination and hydrofluorination of H-ZSM-5 on the catalytic hydroconversion reactions of cyclohexeneApplied Catalysis A: General, 2006
- Hydrogenolysis of n-Hexane on Al2O3-Supported Ir Catalysts of Various TreatmentsJournal of Catalysis, 1999
- Cyclohexene Hydrogenation Catalyzed by MgO-Supported Tetrairidium ClustersJournal of Catalysis, 1995
- On the nature of the active sites for ethylene hydrogenation in metal-free zeolitesJournal of Catalysis, 1992
- Effect of decationation and dealumination of zeolite Y on its acidity as assessed by ammonia desorption measured by differential scanning calorimetry (DSC)Thermochimica Acta, 1991
- Catalytic hydrogenation of cyclohexeneJournal of Catalysis, 1989
- A kinetic and mechanistic study of cyclohexene disproportionation: An example of irreversible hydrogen transferJournal of Catalysis, 1988
- Acid-base strength of Cl− containing aluminate aluminas with low Na+ contaminationReaction Kinetics and Catalysis Letters, 1981
- Surface state and catalytic activity and selectivity of nickel catalysts in hydrogenation reactions III. Electronic and catalytic properties of nickel catalystsJournal of Catalysis, 1980