Two‐stage fatigue life evaluation of an aircraft fuselage panel with a bulging circumferential crack and a broken stringer
Authors:
- 22 November 2013
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 37 (5) , 494-507
Abstract
The article presents two‐stage fatigue life evaluation of a stiffened aluminium aircraft fuselage panel, subject to ground–air–ground pressure cycles, with a bulging circumferential crack and a broken stringer. As a worst‐case scenario, it is assumed that double cracks start at the edge of a rivet hole both in the skin and in the stringer simultaneously. In the first stage, fatigue crack growth analysis is performed until the stringer is completely broken with the crack on the fuselage skin propagating. After the stringer is completely broken, the effect of bulging crack on the fatigue life of the panel is investigated utilizing the stress intensity factors determined by the three‐dimensional finite element analyses of the fuselage panel with the broken stringer. It is concluded that bulging of the skin due to the internal pressure can have significant effect on the stress intensity factor, resulting in fast crack propagation after the stringer is completely broken.Keywords
This publication has 7 references indexed in Scilit:
- Three-dimensional stress intensity factor calibration for a stiffened cracked plateEngineering Fracture Mechanics, 2009
- Test Method for Measurement of Fatigue Crack Growth Rates2008
- Stress intensity factor and load transfer analysis of a cracked riveted lap jointMaterials & Design (1980-2015), 2007
- Fracture Analysis of Stiffened Panels Under Combined Tensile, Bending, and Shear LoadsAIAA Journal, 2005
- On damage tolerance design of fuselage structure—circumferential cracksEngineering Fracture Mechanics, 1987
- Fracture Analysis of Stiffened Structure1984
- the compounding method applied to cracks in stiffened sheetsEngineering Fracture Mechanics, 1976