Self film‐forming and opaque hollow latexes fabricated via seeded emulsion polymerization followed by alkali post‐treatment
Authors:
- 12 June 2015
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (37)
Abstract
In order to obtain novel hollow latexes with both opaque and self film‐forming properties, the four‐layer core/shell latex particles—sequentially consisting of a high carboxyl‐containing soft core, a transition layer, a rigid supporting layer, and an outermost film‐forming layer—are first designed and prepared by emulsion polymerization, and then treated with alkali to fabricate self film‐forming hollow latexes. On the basis of the previous research on the three‐layer core/shell latex, influences of the composition and thickness of the film‐forming layer on the properties and morphologies of the four‐layer core/shell and the final hollow latexes are investigated. Results show that under optimized conditions with butyl acrylate/styrene (BA/St) mass ratio of 2/1, divinyl benzene (DVB) content of 1 wt %, and core/film‐forming layer mass ratio of 1/6 in the film‐forming layer preparation, the final hollow latex particles exhibit best morphology considering both light scattering efficiency and film‐forming capability at room temperature. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42541.Keywords
Funding Information
- The National Basic Research Program of China (nos. 2014CB932202)
This publication has 21 references indexed in Scilit:
- Influence of unsaturated acid monomer on the morphology of latex particles in the preparation of hollow latex via the alkali post-treatmentJournal of Applied Polymer Science, 2012
- Layer-by-Layer Synthesis of Multilayer Core−Shell Latex and the Film Formation PropertiesLangmuir, 2011
- Hollow polymeric nanostructures—Synthesis, morphology and functionProgress in Polymer Science, 2011
- Single‐Hole Hollow Polymer Microspheres toward Specific High‐Capacity Uptake of Target SpeciesAdvanced Materials, 2007
- Influences of the polymerization ingredients on the porous morphology of soap‐free poly(methyl methacrylate/ethyl acrylate/methacrylic acid) seeded latex particlesJournal of Applied Polymer Science, 2005
- Hollow‐particle latexes: Preparation and propertiesJournal of Polymer Science Part A: Polymer Chemistry, 2001
- Functional polymer microspheresProgress in Polymer Science, 2000
- Film formation of latexMaterials Science and Engineering: R: Reports, 1997
- Latex film formationCurrent Opinion in Colloid & Interface Science, 1997
- Highlights of the ALCTS/RS acquisitions administrators' discussion group, January 15, 1991Library Acquisitions: Practice & Theory, 1991