Abstract
Abrasion is a problem for all textile products. Wear caused by contact between fibres and other surfaces can eventually lead to premature rejection of an article, so it is important in the life of clothing and industrial, sporting, or similar textile goods. Four modes of abrasion-testing are used, and machines typical of them are examined in this paper. Degradation is shown to differ in each case. There is variation from the preferred pattern, in which the property measured retains much of its value until well into the useful life of the material, to the least favourable one, in which high initial loss takes place rapidly, with a subsequent slower decline near the end of article life. The degradation constants are calculated for each machine, and subjective criticism is provided. In addition, some effort is made to establish the precision of these constants. It is shown that they can be compared directly by tbe procedure, a fact likely to be useful if laboratory simulation of degradation in use is investigated.

This publication has 1 reference indexed in Scilit: