K-Modified Co–Mn–Al Mixed Oxide—Effect of Calcination Temperature on N2O Conversion in the Presence of H2O and NOx
Open Access
Abstract
The effect of calcination temperature (500–700 °C) on physico-chemical properties and catalytic activity of 2 wt. % K/Co-Mn-Al mixed oxide for N2O decomposition was investigated. Catalysts were characterized by inductively coupled plasma spectroscopy (ICP), X-ray powder diffraction (XRD), temperature-programmed reduction by hydrogen (TPR-H2), temperature-programmed desorption of CO2 (TPD-CO2), temperature-programmed desorption of NO (TPD-NO), X-ray photoelectron spectrometry (XPS) and N2 physisorption. It was found that the increase in calcination temperature caused gradual crystallization of Co-Mn-Al mixed oxide, which manifested itself in the decrease in Co2+/Co3+ and Mn3+/Mn4+ surface molar ratio, the increase in mean crystallite size leading to lowering of specific surface area and poorer reducibility. Higher surface K content normalized per unit surface led to the increase in surface basicity and adsorbed NO per unit surface. The effect of calcination temperature on catalytic activity was significant mainly in the presence of NOx, as the optimal calcination temperature of 500 °C is necessary to ensure sufficient low surface basicity, leading to the highest catalytic activity. Observed NO inhibition was caused by the formation of surface mononitrosyl species bonded to tetrahedral metal sites or nitrite species, which are stable at reaction temperatures up to 450 °C and block active sites for N2O decomposition.Keywords
Funding Information
- European Regional Development Fund (CZ.02.1.01/0.0/0.0/16_019/0000853)
- Ministry of Education, Youth and Sports of the Czech Republic (LM2018098)
This publication has 69 references indexed in Scilit:
- Stainless steel wire mesh-supported potassium-doped cobalt oxide catalysts for the catalytic decomposition of nitrous oxideApplied Catalysis B: Environment and Energy, 2012
- Electronic nature of potassium promotion effect in Co–Mn–Al mixed oxide on the catalytic decomposition of N2OCatalysis Communications, 2011
- Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and NiApplied Surface Science, 2011
- Potassium Promotion of Cobalt Spinel Catalyst for N2O Decomposition—Accounted by Work Function Measurements and DFT ModellingCatalysis Letters, 2008
- Application of Calcined Layered Double Hydroxides as Catalysts for Abatement of N2O EmissionsCollection of Czechoslovak Chemical Communications, 2008
- Effect of Mn/Al ratio in Co–Mn–Al mixed oxide catalysts prepared from hydrotalcite-like precursors on catalytic decomposition of N2OCatalysis Today, 2007
- Catalytic decomposition of nitrous oxide over catalysts prepared from Co/Mg-Mn/Al hydrotalcite-like compoundsApplied Catalysis B: Environment and Energy, 2005
- Thermal behaviour of Cu–Mg–Mn and Ni–Mg–Mn layered double hydroxides and characterization of formed oxidesApplied Clay Science, 2005
- Energetics of Potassium Loss from Styrene Catalyst Model Components: Reassignment of K Storage and Release PhasesJournal of Catalysis, 2002
- Temperature-Programmed Reduction of Al2O3-, SiO2-, and carbon-supported Re2O7 catalystsJournal of Catalysis, 1985