Resist Filling Study for UV Nanoimprint Lithography Using Stamps with Various Micro/Nano Ratios
Open Access
- 2 July 2018
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 9 (7) , 335
Abstract
Mixed micro- and nanoscale structures are gaining popularity in various fields due to their rapid advances in patterning. An investigation in stamp resist filling with multiscale cavities via ultraviolet (UV) nanoimprint lithography (UV-NIL) is necessary to improve stamp design. Here, simulations at the level of individual features were conducted to explain different filling behaviors of micro- and nanoscale line patterns. There were noticeable interactions between the micro-/nanoscale cavities. These delayed the resist filling process. Several chip-scale simulations were performed using test patterns with different micro/nano ratios of 1:1, 1:2, and 1:3. There were some minor influences that changed the micro/nano ratios on overall imprint qualities. During the imprinting process, the pressure difference at the boundary between micro- and nanoscale patterns became obvious, with a value of 0.04 MPa. There was a thicker residual layer and worse cavity filling when the proportion of nanoscale structures increased.Keywords
Funding Information
- the Fundamental Research Funds for the Central Universities (2018B23114)
- Changzhou Sci&Tech Program (CJ20179036)
- NSFC through Hohai University (61504038)
This publication has 30 references indexed in Scilit:
- A low-cost method of fabricating hybrid micro-nano fluidic chip by double-layer PDMS mold and UV–thermal nanoimprintingMicrofluidics and Nanofluidics, 2016
- Light-Trapping and Interface Morphologies of Amorphous Silicon Solar Cells on Multiscale Surface Textured SubstratesIEEE Journal of Photovoltaics, 2013
- Replication of nano/micro-scale features using bulk metallic glass mold prepared by femtosecond laser and imprint processesJournal of Micromechanics and Microengineering, 2013
- UV capillary force lithography for multiscale structuresJournal of Vacuum Science & Technology B, 2012
- Nanoreplicated positive and inverted submicrometer polymer pyramid array for surface-enhanced Raman spectroscopyJournal of Nanophotonics, 2011
- UV nanoimprint lithography of sub-100 nm nanostructures using a novel UV curable epoxy siloxane polymerMicroelectronic Engineering, 2010
- Fabrication of micro/nano fluidic channels by nanoimprint lithography and bonding using SU-8Microelectronic Engineering, 2009
- Pattern replication of 100nm to millimeter-scale features by thermal nanoimprint lithographyMicroelectronic Engineering, 2006
- One-step lithography for various size patterns with a hybrid mask-moldMicroelectronic Engineering, 2004
- A combined-nanoimprint-and-photolithography patterning techniqueMicroelectronic Engineering, 2004