A 2–40 GHz Probe Station Based Setup for On-Wafer Antenna Measurements

Authors:
  • KBKenneth M. Brakora
    Kenneth M. Brakora
  • WHWonbin Hong
    Wonbin Hong
  • KJKaran Jumani
    Karan Jumani
  • DLDaHan Liao
    DaHan Liao
  • MRMustafa Rangwala
    Mustafa Rangwala
  • YWYun-Zhen Wee
    Yun-Zhen Wee
  • XZXinen Zhu
    Xinen Zhu
  • KSKamal Sarabandi
    Kamal Sarabandi

Abstract
A probe station based setup for on-wafer antenna measurements is presented. The setup allows for measurement of return loss and radiation patterns of an on-wafer antenna-hence-forth referred to as the antenna under test (AUT), radiating at broadside and fed through a coplanar waveguide (CPW). It eliminates the need for wafer dicing and custom-built test fixtures with coaxial connectors or waveguide flanges by contacting the AUT with a coplanar microwave probe. In addition, the AUT is probed exactly where it will be connected to a transceiver IC later on, obviating de-embedding of the measured data. Sources of measurement errors are related to calibration, insufficient dynamic range, misalignment, forward scattering from nearby objects, and vibrations. The performance of the setup is demonstrated from 2 to 40 GHz through measurement of an on-wafer electrically small slot antenna (lambda0/35 times lambda0/35,3.5 times 3.5 mm2) radiating at 2.45 GHz and an aperture coupled microstrip antenna (2.4 times 1.7 mm2) radiating at 38 GHz.

This publication has 17 references indexed in Scilit: