Shear and Densification of Glass Powder Compacts
Authors:
- 1 May 1989
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 72 (5) , 798-804
Abstract
Sinter‐forging types of experiments were carried out on powder compacts of glass. The shear and densification strains were measured simultaneously during the forging process. This information was analyzed to obtain the shear viscosity of the glass and the intrinsic sintering pressure, both as a function of density. The viscosity of the porous glass changed nonlinearly with density and was empirically fitted to an exponential function. The sintering pressure was found to increase with density; it was 100 kPa at ρ= 0.55 and 250 kPa at ρ= 0.90. In this range the sintering pressure could be adequately described in terms of a simple geometrical model. However, when the density approached 95%, the sintering pressure appeared to assume an uncertain value. The measurements were also used to calculate the viscous bulk modulus of the porous glass; these estimates agreed well with theoretical prediction.Keywords
This publication has 7 references indexed in Scilit:
- Creep and Densification During Sintering of Glass Powder CompactsJournal of the American Ceramic Society, 1987
- Shear Deformation and Densification of Powder CompactsJournal of the American Ceramic Society, 1986
- Analysis of Sintering of a Composite with a Glass or Ceramic MatrixJournal of the American Ceramic Society, 1986
- Effect of Shear Stress on SinteringJournal of the American Ceramic Society, 1986
- Separation of Cavitation‐Strain and Creep‐Strain During DeformationJournal of the American Ceramic Society, 1982
- The Elastic Constants of a Solid containing Spherical HolesProceedings of the Physical Society. Section B, 1950
- A Phenomenological Theory of SinteringProceedings of the Physical Society. Section B, 1949