Synthesis of a Novel Composite Sorbent Coated with Siderite Nanoparticles and its Application for Remediation of Water Contaminated with Congo Red Dye
Open Access
- 13 February 2020
- journal article
- research article
- Published by Springer Nature in International Journal of Environmental Research
- Vol. 14 (2) , 177-191
Abstract
Re-use of the byproduct wastes resulting from different municipal and industrial activities in the reclamation of contaminated water is real application for green projects and sustainability concepts. In this direction, the synthesis of composite sorbent from the mixing of waterworks and sewage sludge coated with new nanoparticles named “siderite” (WSSS) is the novelty of this study. These particles can be precipitated from the iron(II) nitrate using waterworks sludge as alkaline agent and source of carbonate. Characterization tests using X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) mapping revealed that the coating process was correctly achieved and siderite nanoparticles were planted on the surface of the composite sorbent. Interaction between Congo Red dye and composite sorbent was evaluated through a set of batch tests under the variation of agitation time, pH of aqueous solution, and sorbent dosage. The results proved that the prepared sorbent had a high ability in the treatment of water contaminated with Congo Red dye in comparison with previous studies and the maximum adsorption capacity reached to maximum value i.e. 9416 mg/g. The sorption process was governed by electrostatic attractions; however, Sips and Pseudo-second-order models described this process with coefficient of determination greater than 0.99.GraphicKeywords
This publication has 48 references indexed in Scilit:
- Adsorption of Dyes on Hierarchical Mesoporous TiO2 Fibers and Its Enhanced Photocatalytic PropertiesThe Journal of Physical Chemistry C, 2011
- Synthesis of a novel flocculant on the basis of crosslinked Konjac glucomannan-graft-polyacrylamide-co-sodium xanthate and its application in removal of Cu2+ ionCarbohydrate Polymers, 2010
- Insights into the modeling of adsorption isotherm systemsChemical Engineering Journal, 2010
- Treatment of azo dye production wastewaters using Photo-Fenton-like advanced oxidation processes: Optimization by response surface methodologyJournal of Photochemistry and Photobiology A: Chemistry, 2009
- Modeling of adsorption isotherms of phenol and chlorophenols onto granular activated carbonPart I. Two-parameter models and equations allowing determination of thermodynamic parametersJournal of Hazardous Materials, 2007
- Adsorption characteristics of Congo Red onto the chitosan/montmorillonite nanocompositeJournal of Hazardous Materials, 2007
- Adsorption of direct dye on palm ash: Kinetic and equilibrium modelingJournal of Hazardous Materials, 2007
- Congo red and protein aggregation in neurodegenerative diseasesBrain Research Reviews, 2007
- The adsorption kinetics of the cationic dye, methylene blue, onto clayJournal of Hazardous Materials, 2006
- Pseudo-second order model for sorption processesProcess Biochemistry, 1999