Sintering and Mechanical Properties of Stoichiometric Mullite
Authors:
- 1 January 1985
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 68 (1) , C-6-C-7
Abstract
Stoichiometric mullite powder (3Al 2 O 3 ·2SiO 2 ) prepared by spray pyrolysis and sintered at 1650°C attained 95% of theoretical density. The flexural strength was 360 MPa at room temperature and decreased slightly at 1400°C. A fairly high K Ic value (2.8 MN/m 3/2 ) was obtained. These mechanical properties can be attributed to the highly homogeneous stoichiometric composition of the raw powder.Keywords
This publication has 5 references indexed in Scilit:
- Mechanical Properties of MulliteJournal of the American Ceramic Society, 1983
- High‐Temperature Mechanical Properties of Mullite Under CompressionJournal of the American Ceramic Society, 1977
- Stable and Metastable Equilibria in the System SiO 2 ‐Al 2 O 3Journal of the American Ceramic Society, 1975
- Creep of Polycrystalline MulliteJournal of the American Ceramic Society, 1975
- Synthesis and Mechanical Properties of Stoichiometric Aluminum Silicate (Mullite)Journal of the American Ceramic Society, 1972