Deep learning recognition of bolt looseness and axial force compensation of shape memory alloy
Authors:
- Genshang WuGWGenshang Wu
- Xinyao SunXSXinyao Sun
- Shuanghui HaoSHShuanghui Hao
- XianFeng YanXYXianFeng Yan
- YiTao ZhaoYZYiTao Zhao
- 1 September 2022
- journal article
- research article
- Published by British Institute of Non-Destructive Testing (BINDT) in Insight - Non-Destructive Testing and Condition Monitoring
- Vol. 64 (9) , 528-536
Abstract
Loosening of bolts, which is a common form of failure in bolted connections, causes relative slippage between the connected surfaces. The bolts fail under the action of external shear forces due to fatigue and breakage, thereby affecting the service performance and connection strength of the equipment, potentially resulting in major accidents. At present, condition monitoring, which is used to detect the tightness of bolt connections, has obtained acceptable results; however, most of them are still carried out under laboratory conditions and cannot be applied to engineering. In addition, effective remedial measures should be implemented after detecting bolt looseness. On the basis of such problems, a multi-bolt looseness monitoring method based on machine vision and deep learning is proposed. At the same time, shape memory alloy is used in the design of a structure that actively compensates for loose bolts. This method realises bolt recognition of the bolt connection structure through video monitoring and looseness monitoring of multi-target bolts at the same time. When the system detects that the bolts are loosened, an alarm signal is issued and, at the same time, the control device is activated to compensate, to increase the time available for repair time and to ensure the service performance of major equipment.Keywords
This publication has 10 references indexed in Scilit:
- Investigation of energy storage in bolted joint components and the development of a geometry selection design tool for Belleville washersEngineering Structures, 2019
- Quantitative evaluation of residual torque of a loose bolt based on wave energy dissipation and vibro-acoustic modulation: A comparative studyJournal of Sound and Vibration, 2016
- Bolt axial stress measurement based on a mode-converted ultrasound method using an electromagnetic acoustic transducerUltrasonics, 2014
- Role of Washers in Controlling Loosening of Full Threaded Bolted JointsProcedia Technology, 2014
- An investigation on the anti-loosening characteristics of threaded fasteners under vibratory conditionsMechanism and Machine Theory, 2010
- Measurement of axial stress using mode-converted ultrasoundNDT & E International, 2009
- Evaluation of Rock Bolt Integrity using Guided Ultrasonic WavesGeotechnical Testing Journal, 2009
- Effect of washer size and tightening torque on the performance of bolted joints in composite structuresComposite Structures, 2006
- Study of Bolt Load Loss in Bolted Aluminum JointsJournal of Engineering Materials and Technology, 2006
- Contactless measurement of bolt axial stress using a shear-wave electromagnetic acoustic transducerNDT & E International, 2001