Determination of Serviceability Limits of a Turboshaft Engine by the Criterion of Blade Natural Frequency and Stall Margin
Open Access
Abstract
This paper analyzes the health and performance of the 12-stage axial compressor of the TV3-117VM/VMA turboshaft operated in a desert environment. The results of the dimensional control of 4800 worn blades are analyzed to model the wear process. Operational experience and two-phase flow simulations are used to assess the effectiveness of an inlet particle separator. Numerical modal analysis is performed to generate the Campbell diagram of the worn blades and identify resonant blade vibrations which can lead to high cycle fatigue (HCF): mode 7 engine order 30 in the first stage and mode 8 engine order 60 in the fourth. It is also shown that the gradual loss of the stall margin over time determines the serviceability limits of compressor blades. In particular, the chord wear of sixth-stage blades as high as 6.19 mm results in a reduction of the stall margin by 15–17% and a permanent stall at 770–790 flight hours. In addition, recommendations setting out go/no-go criteria are made to maintenance and repair organizations.Keywords
All Related Versions
Funding Information
- European Union’s Horizon 2020 (724034)
This publication has 25 references indexed in Scilit:
- Crack propagation analysis of mechanically damaged compressor blades subjected to high cycle fatigueEngineering Failure Analysis, 2011
- Assessment of reduced models for the detection of modal interaction through rotor stator contactsJournal of Sound and Vibration, 2010
- Turboshaft engine air particle separationProgress in Aerospace Sciences, 2010
- Turbine Blade Surface Deterioration by ErosionJournal of Turbomachinery, 2004
- Effect of surface roughness on step-wise S–N characteristics in high strength steelInternational Journal of Fatigue, 2003
- Quantitative Evaluation of Effect of Surface Roughnesson Fatigue Strength.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 1996
- Erosion of Dust-Filtered Helicopter Turbine Engines Part I: Basic Theoretical ConsiderationsJournal of Aircraft, 1995
- An investigation of impingement erosion using single particlesWear, 1972
- Some observations on the erosion of ductile metalsWear, 1972
- A study of erosion phenomenaWear, 1963