Reliability of Copper Sintered Interconnects Under Extreme Thermal Shock Conditions
Authors:
- 11 September 2023
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
Abstract
Copper flakes-based sinter paste showed high reliability under thermal shock conditions. A dense and homogeneous interconnect was realized while sintering for 5 min at 275°C under 15 MPa bonding pressure, with the flakes showing the unique behavior of stacking over each other to realize a dense and homogeneous interconnect. Porosity under 10 % could be achieved. The paste could be sintered under a constant nitrogen flow and did not need a fully inert atmosphere during sintering. Under high stress thermal shock cycling of + 175/-65°C, the sintered interconnects showed a drop of 25% in the shear strength values after 1000 TST, consistent with observations made with Ag sintering. Thermal conductivity more than 200 W/mK and electrical conductivity of 20 Ms/m is achieved using the Cu sinter paste.Keywords
This publication has 14 references indexed in Scilit:
- Unraveling the complex oxidation effect in sintered Cu nanoparticle interconnects during high temperature agingCorrosion Science, 2022
- Reliability of Ag Sinter-Joining Die Attach Under Harsh Thermal Cycling and Power Cycling TestsJournal of Electronic Materials, 2021
- Comparing the mechanical and thermal-electrical properties of sintered copper (Cu) and sintered silver (Ag) jointsJournal of Alloys and Compounds, 2021
- Crack Effect on the Equivalent Thermal Conductivity of Porously Sintered SilverJournal of Electronic Materials, 2020
- Effects of thermal aging on long-term reliability and failure modes of nano-silver sintered lap-shear jointInternational Journal of Adhesion and Adhesives, 2020
- Silver Sintering in Power Electronics: The State of the Art in Material Characterization and Reliability Testing2018
- Review of silver nanoparticle based die attach materials for high power/temperature applicationsMicroelectronics Reliability, 2017
- "LaTIMA" an innovative test stand for thermal and electrical characterization of highly conductive metals, die attach, and substrate materials2015
- A review of high-temperature electronics technology and applicationsJournal of Materials Science: Materials in Electronics, 2015
- Chapter 1 Materials Properties and Characterization of SiC1998